Abstract:Via the phase inversion process,the novel PSF/TiO2 organic-mineral composite ultrafiltration membranes were prepared by uniformly adding TiO2 nanoparticles treated with anionic surfactant of sodium dodecyl sulfate(SDS) into the casting solution of polysulfone.The properties of the composite membranes prepared,such as the ultrafiltration(UF) performance,hydrophilicity,viscosity,fouling resistance,mechanical strength and structure,were measured by appropriate instruments,and the influence of TiO2 content on the performances of the prepared composite membranes was investigated.The experimental results show that,when the amount of TiO2 added in the casting solution is 2%(wt),the properties and structure of the composite membranes prepared can be improved obviously.The SEM micrographs show that the macrovoids of the membranes are suppressed,the porosity is increased with a decrease of pore size,and at the same time the permeability of the composite membrane increases 69% with a slight change of retention,the bursting strength and the breaking strength also increase 50% and 26.7%,respectively.Moreover,the contact angle decreases from 72.1° of the PSF membrane to 41.4°,which implies that the fouling resistance of the membrane improves.However,if adding too much TiO2 nanoparticles into the casting solution of polysulfone and causes the TiO2 concentration higher than 3 %(wt),the porosity,UF performance,hydrophilicity and the mechanical strength of the composite membranes prepared will decline.Therefore,adding proper amount of TiO2 nanoparticles in polysulfone membrane is the key factor which can obviously improve the properties of the composite membrane,and accordingly its fouling resistance and lifetime will enhance too.

Polysulfone/TiO2 hybrid ultrafiltration membrane prepared by the sol-gel process

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Kinetic and thermodynamic research of polysulfone/TiO2 hybrid ultrafiltration membrane

Preparation and Characterization of PSF/TiO_2 Organo-Mineral Composite Ultrafiltration Membrane

Preparation and characterization of poly (vinylidene fluoride)/TiO 2 hybrid membranes

Preparation and Properties of Polysulfone/tio2 Composite Ultrafiltration Membranes

Preparation and characterizations of a new PS/TiO2 hybrid membranes by sol–gel process

PVDF–TiO2 Composite Hollow Fiber Ultrafiltration Membranes Prepared by TiO2 Sol–gel Method and Blending Method

Preparation and Characterization of PPESK Ultrafiltration Membrane Modified by TiO2 Sol

Preparation and Characterization of PVDF–SiO2 Composite Hollow Fiber UF Membrane by Sol–gel Method

A Novel PES-TiO2 Hollow Fiber Hybrid Membrane Prepared Via Sol-Gel Process Assisted Reverse Thermally Induced Phase Separation (RTIPS) Method

Preparation and anti-biofouling performance of PSf/TiO2 ultrafiltration membrane by in-situ embedment approach

Preparation Amd Performance Research of the Sulfonated Polysulfone Modified Ultrafiltration Membrane

Preparation of TiO2/PVDF ultrafiltration membrane

Zwitterionic Polysulfone Copolymer/Polysulfone Blended Ultrafiltration Membranes with Excellent Thermostability and Antifouling Properties

Research and Applications of PSF Ultrafiltration Membrane

Preparation and Characterization of Pvdf/Tio2 Hybrid Membranes with Ionic Liquid Modified Nano-Tio2 Particles

Hydrophilic Study of PVDF Hollow Fiber UF Membrane Modifyed by TiO_2 Sol

Effects of TiO_2 Nanoparticles on the Performance of PVDF Ultrafiltration Membrane

Preparation and properties of polyamide/titania composite nanofiltration membrane by interfacial polymerization

Cu-TCPP Nanosheets Blended Polysulfone Ultrafiltration Membranes with Enhanced Antifouling and Photo-Tunable Porosity