Abstract:As one of the advanced manufacturing technologies, high-speed five-axis ball end milling has been widely used in high-end manufacturing fields because of its high efficiency, high quality, and high precision. Based on the analysis of cutting effect and response surface methodology, a series of experiments were carried out. Based on geometric modeling and numerical simulation, various tool postures are comprehensively analyzed, and the down milling process combining positive tilt angle and positive lead angle can achieve better cutting effect. The variance and interaction of the important factors affecting the surface integrity and the cutting process were analyzed, and the polynomial equations reflecting the relationship between the processing index and the input process variable were obtained. Finally, a process optimization schemes with various optimization criteria were proposed. When using a larger tilt, smaller fz and higher spindle rotation speed for multi-objective optimization, a combination of a smaller ap and a smaller ae, or a combination of a larger ap and a smaller ae is advantageous to result in high ideality. The combinations of large lead, large tilt, and high spindle speed give full play to the advantages of high-speed cutting technology. The process optimization plan will help determine the processing strategy for achieving the desired machining results and better surface quality based on actual application requirements. Finally, the future research areas are prospected for the high-performance machining technology.

The Influence of Feed Rate and Pick Feed on Surface Roughness in High-Speed Milling

Machining Parameter Optimization of Milling Process Based on Uniform Design

Experimental Research on the Effect of Grinding Parameters on Ceramic Machined Surface Roughness

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Study on Analytical Model of Surface Roughness Prediction in NC Machining

The optimization of cutting parameters for surface roughness in high speed milling based on Taguchi method

Optimization of Surface Roughness by Uniform Design of Experiments in Milling of 1Cr18Ni9Ti

Study and Modeling for Surface Roughness of Aluminum Alloy Milling

Influence Factors of Surface Topography in Micro-Side Milling

Finite Element Simulation of Serrated Chip Formation in High-speed Milling of A lloy Cast Iron

ANALYSIS OF THE EFFECT OF VARYING THE CUTTING RATIO ON FORCE COMPONENTS AND SURFACE ROUGHNESS IN FACE MILLING

Optimization of high-speed milling hardened mold processing parameters based on surface morphology research

Experimental Study on Chip Shape and Tool Wear of High-Speed and Micro-Feed Cutting

High Efficiency Orientated Milling Parameter Optimization with Tool Wear Monitoring in Roughing Operation

Optimization analysis considering the cutting effects for high-speed five-axis down milling process by employing ball end mill

Application of RSM on Optimization of Cutting Parameters in High Speed Milling of Ultra-high-strength Steel

Study on the influence of milling tool inclination angle on surface quality and optimal selection in the ultra-precision diamond milling of curved surfaces

Feedrate scheduling strategy for free-form surface machining through an integrated geometric and mechanistic model

Theoretical investigation on the flank milled roughness profile in quasi-homogeneous materials

Modelling and Prediction of the Effect of Cutting Strategy on Surface Generation in Ultra-Precision Raster Milling

Optimization of Surface Quality and Power Consumption in Machining Hardened AISI 4340 Steel