Abstract:The evaluation of thermo-hydro-mechanical (THM) coupling response of clayey soils has emerged as an imperative research focus within thermal-related geotechnical engineering. Clays will exhibit nonlinear physical and mechanical behavior when subjected to variations in effective stress and temperature. Additionally, temperature gradient within soils can induce additional pore water migration, thereby resulting in a significant thermo-osmosis effect. Indeed, thermal consolidation of clayey soils constitutes a complicated THM coupling issue, whereas the theoretical investigation into it currently remains insufficiently developed. In this context, a one-dimensional mathematical model for the nonlinear thermal consolidation of saturated clay is proposed, which comprehensively incorporates the crucial THM coupling characteristics under the combined effects of heating and mechanical loading. In current model, the interaction between nonlinear consolidation and heat transfer process is captured. Heat transfer within saturated clay is investigated by accounting for the conduction, advection, and thermomechanical dispersion. The resulting governing equations and numerical solutions are derived through assuming impeded drainage boundaries. Then, the reasonability of current model is validated by degradation and simulation analysis. Subsequently, an in-depth assessment is carried out to investigate the influence of crucial parameters on the nonlinear consolidation behavior. The results indicate that increasing the temperature can significantly promote the consolidation process of saturated clay, the dissipation rate of excess pore water pressure (EPWP) is accelerated by a maximum of approximately 15%. Moreover, the dissipation rate of EPWP also increases with the increment of pre-consolidation pressure, while the corresponding settlement decreases. Finally, the consolidation performance is remarkably impacted by thermo-osmosis and neglecting this process will generate a substantial departure from engineering practice.

ON MODELING OF THERMO-MECHANICAL VOLUME CHANGE BEHAVIOR OF SATURATED CLAYS

Thermodynamics-based bounding surface model for overconsolidated clay

Modeling Temperature-Dependent Behavior of Soft Clay

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

Investigating Temperature Effects on the Shear Behavior of Clays: Molecular Dynamics Simulations

A Thermal State‐dependent Bounding Surface Model for Volume Change of Clay

Effects of Thermal Cycles on Soil Behaviour: Theoretical and Experimental Studies

A thermodynamic-based model for modeling thermo-elastoplastic behaviors of saturated clayey soils considering bound water dehydration

Modelling the thermo-mechanical volume change behaviour of compacted expansive clays

Modeling of Thermo-Mechanical Behavior of Saturated Clays

A Thermo-Elasto-Plastic Constitutive Model For Saturated Clay Based On Disturbed State Concept

A Unified Thermal-Hardening and Thermal-Softening Constitutive Model of Soils

Constitutive Model for Unsaturated Clays Considering Temperature Effects

Thermo-elasto-plastic Modeling of Saturated Clays under Undrained Conditions

A Two-Surface Thermomechanical Plasticity Model Considering Thermal Cyclic Behavior

Simulation of Long-Term Thermo-Mechanical Response of Clay Using an Advanced Constitutive Model

Non-isothermal Unified Hardening Model: a Thermo-Elasto-plastic Model for Clays

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

UH Model Considering Temperature Effects

Modeling the Combined Effect of Time and Temperature on Normally Consolidated and Overconsolidated Clays

Insight into nonlinear thermal consolidation of saturated clay under coupled thermo-mechanical loading: a unified one-dimensional model