Abstract:The evaluation of thermo-hydro-mechanical (THM) coupling response of clayey soils has emerged as an imperative research focus within thermal-related geotechnical engineering. Clays will exhibit nonlinear physical and mechanical behavior when subjected to variations in effective stress and temperature. Additionally, temperature gradient within soils can induce additional pore water migration, thereby resulting in a significant thermo-osmosis effect. Indeed, thermal consolidation of clayey soils constitutes a complicated THM coupling issue, whereas the theoretical investigation into it currently remains insufficiently developed. In this context, a one-dimensional mathematical model for the nonlinear thermal consolidation of saturated clay is proposed, which comprehensively incorporates the crucial THM coupling characteristics under the combined effects of heating and mechanical loading. In current model, the interaction between nonlinear consolidation and heat transfer process is captured. Heat transfer within saturated clay is investigated by accounting for the conduction, advection, and thermomechanical dispersion. The resulting governing equations and numerical solutions are derived through assuming impeded drainage boundaries. Then, the reasonability of current model is validated by degradation and simulation analysis. Subsequently, an in-depth assessment is carried out to investigate the influence of crucial parameters on the nonlinear consolidation behavior. The results indicate that increasing the temperature can significantly promote the consolidation process of saturated clay, the dissipation rate of excess pore water pressure (EPWP) is accelerated by a maximum of approximately 15%. Moreover, the dissipation rate of EPWP also increases with the increment of pre-consolidation pressure, while the corresponding settlement decreases. Finally, the consolidation performance is remarkably impacted by thermo-osmosis and neglecting this process will generate a substantial departure from engineering practice.

Constitutive Model for Unsaturated Clays Considering Temperature Effects

Thermodynamics-based bounding surface model for overconsolidated clay

A constitutive model for thermal consolidation with vertical drains and its experimental verification

A Bounding Surface Model for Anisotropically Overconsolidated Clay Incorporating Thermodynamics Admissible Rotational Hardening Rule

Nonlinear Consolidation Analysis of Natural Structured Clays under Time-Dependent Loading

STZ-Clay: A Shear-Transformation-zone Theory Based Constitutive Model for Clay

Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution

Modified Duncan-Chang Model Considering Physical Properties of Saturated Clays

Modeling Temperature-Dependent Behavior of Soft Clay

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

Modeling Strain-Rate Dependent Behavior of KR0-Consolidated Soft Clays

Cyclic Softening-Pore Pressure Generation Model For Overconsolidated Clay Under Cyclic Loading

Mechanisms of Quasi-Preconsolidation Stress Development in Clays: A Rheological Model

One Dimensional Formulae for Time-Dependent Compression Characteristics of Over-Consolidated Clays

A Thermal State‐dependent Bounding Surface Model for Volume Change of Clay

Modeling Effects of Clay Structure on Consolidation Behavior

State parameter–based thermomechanical constitutive model for saturated fine-grained soils

Effects of Thermal Cycles on Soil Behaviour: Theoretical and Experimental Studies

Thermodynamic Constitutive Model for Non-Isothermal Consolidation and Undrained Shear Behaviors of Saturated Soils

Insight into nonlinear thermal consolidation of saturated clay under coupled thermo-mechanical loading: a unified one-dimensional model

An Elastic-Viscoplastic Model for Time-Dependent Behavior of Soft Clay and Its Application on Rheological Consolidation