Abstract:Acrylate is a popular polymer grouting material that has been widely used to control groundwater seepage. However, the vulnerability of acrylate slurry to dynamic water washout restricts its application in groundwater environments characterized by high flow velocity and water pressures. In this paper, lithium bentonite (Li-B) was used to modify the traditional magnesium acrylate (AC) grouting material. The influence of Li-B to AC ratios on the modified materials' washout resistance was explored, and the modification mechanism was analyzed using X-ray diffraction (XRD), infrared spectroscopy (IR), and scanning electron microscopy (SEM). Finally, the anti-washout ability of the modified slurry was verified through engineering applications. Results revealed that LiB-AC grout had adjustable setting times (10.5 to 395.6 s), minimal bleeding (0.1%), higher viscosity (65 mPa·s) and expansibility (350%), stronger anti-water dispersibility (24 times that of pure AC slurry), higher mechanical strength (compressive strength is 0.386 MPa, tensile strength is 0.088 MPa), and better impermeability (2.23 × 10-8 m/s). The lithium bentonite was beneficial to the setting time, bleeding, viscosity, slurry retention rate, impermeability, and mechanical strength of the acrylate grout. However, it diminished the expansibility of the acrylate grout. At the optimal acrylate content (20%), the mechanical strength and impermeability of the LiB-AC grout were the highest. The better performance of LiB-AC grout was attributed to the formation of a more stable and dense interlaced spatial network structure after the modification by Li-B. The LiB-AC grout was used in the dynamic water grouting project of a metro shield tunnel segment and achieved better anti-washout performance than cement-water glass and pure AC slurry.

Preparation and Properties of A Water-Swelling Rubber by in Situ Formed Lithium Acrylate in Nitrile Rubber

Synthesis and Redispersibility of Poly(styrene-block-n-butyl Acrylate) Core–Shell Latexes by Emulsion Polymerization with RAFT Agent–Surfactant Design

A Facile and Environmentally Friendly Approach to Fabricate Hybrid Crosslinked Nitrile Butadiene Rubber with Comprehensively Improved Mechanical Performances by Incorporating Sacrificial Ionic Bonds

Mechanical properties, water swelling behavior, and morphology of swellable rubber compatibilized by PVA-g-PBA

Comparison of morphology and mechanical properties of peroxide-cured acrylonitrile butadiene rubber/LDH composites prepared from different organically modified LDHs

PROPERTIES OF WATER-SWELLABLE COMPOUNDS BASED ON NITRILE RUBBER WITH VARIED ACRYLONITRILE CONTENT

Ab Initio RAFT Emulsion Copolymerization of Styrene and Acrylonitrile

Effects Of Water Solubility Of Acrylonitrile On Vinylidene Chloride/Acrylonitrile/Styrene Suspension Polymerization

Synthesis and Characterization of Self-cross Linking Hybrid Silicone-acrylate Emulsion at Ambient Temperature

Enhancing Performances of Polyamide 66 Short Fiber/Natural Rubber Composites via In Situ Vulcanization Reaction

Preparation and properties of the aramid pulp/nitrile butadiene rubber composites with compatibilization of ionic liquids

Preparation of polyacrylic acid IPN hydrogel

Improved mechanical properties and special reinforcement mechanism of natural rubber reinforced by in situ polymerization of zinc dimethacrylate

Synthesis and properties of crosslinked waterborne polyurethane/acrylate copolymer latexes using AIBN initiator based on a solvent-/emulsifier-free method

Improving the Anti-washout Property of Acrylate Grouting Material by Bentonite: Its Characterization, Improving Mechanism, and Practical Application

Cure kinetics and morphology of natural rubber reinforced by the in situ polymerization of zinc dimethacrylate

Rheology of nitrile rubber with hybrid crosslinked network composed of covalent bonding and hydrogen bonding

Synergistic impact of ionic liquid on interfacial interaction and viscoelastic behaviors of silica filled nitrile butadiene rubber nanocomposites

Influence of Unsaturated Acid Monomer on the Morphology of Latex Particles in the Preparation of Hollow Latex Via the Alkali Post‐treatment

Manipulation of chain transfer agent and cross-linker concentration to modify the performance of fluorinated acrylate latex pressure sensitive adhesive

Improvement in mechanical properties of NBR/AO60/MMT composites by surface hydrogen bond