Abstract:With the progress in the purity and alignment of semiconductor carbon nanotubes (CNTs), how to efficiently remove the conjugated polymers twining round CNTs has become an important and urgent matter for the further development of CNT electronics. The removal of conjugated polymers (CPs) by wet cleaning will inevitably lead to the destruction of the morphology of aligned CNT array films, which will cause the monolayered CNTs to form agglomeration or stacking. Therefore, it is necessary to develop a dry method to remove CPs on the aligned CNT films. In this work, we studied the thermal decomposition characteristics of CNTs and CPs in detail, and found that the ratio of the oxidative decomposition rate of CNTs and CPs could reach up to 35.7 in the oxygen environment at 450 °C. The transmission electron microscopes (TEMs) show that such a dry treatment process can effectively remove the polymer on CNTs without affecting the morphology of CNT arrays. The Raman spectrum show that ratio of G/D of the annealed sample is as high as 41.8, which indicates that the CNTs are not detectable damaged during the annealed process. The fabricated field-effect transistors (FETs) with a length of 2 μm exhibit a current on/off ratio higher than 104 and a current density higher than 660 μA/μm, which further justifies that the CNT arrays treated by the dry method exhibit high quality.

In-situ Purification of Aligned Carbon Nanotube Arrays by H_2O_2

Water-Assisted Preparation of High-Purity Semiconducting (14,4) Carbon Nanotubes

Wet Purification of Aligned Carbon Nanotube Arrays and Its Impact on the Morphology of the Carbon Nanotube Arrays

The Fabrication And Characterization Of N-Doped Aligned Carbon Nanotube Arrays In Large Area

Microwave Purification of Large-Area Horizontally Aligned Arrays of Single-Walled Carbon Nanotubes

Controlled Removal of Individual Carbon Nanotubes from Vertically Aligned Arrays for Advanced Nanoelectrodes

Laser-induced Nanoscale Thermocapillary Flow for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes.

Laser irradiation for purification of aligned carbon nanotube films

Purification and characterization of single-walled carbon nanotubes produced by arc-discharge

Purification of Cvd Synthesized Single-Wall Carbon Nanotubes by Different Acid Oxidation Treatments

The release of free standing vertically-aligned carbon nanotube arrays from a substrate using CO2 oxidation

Thermal Management for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes Based on Thermocapillary Flow by Pulsed Heating

Oxidation and Opening of Well-Aligned Carbon Nanotube Tips

Pretreatment Control of Carbon Nanotube Array Growth for Gas Separation: Alignment and Growth Studied Using Microscopy and Small-Angle X-ray Scattering.

Aligned Carbon Nanotube Growth under Oxidative Ambient

Alcohol-Assisted Rapid Growth of Vertically Aligned Carbon Nanotube Arrays

Purification of multi-walled carbon nanotubes and its surface modification

A Treatment Method to Give Separated Multi-Walled Carbon Nanotubes with High Purity, High Crystallization and a Large Aspect Ratio

Carbon dioxide-boosted growth of high-density and vertically aligned carbon nanotube arrays on a stainless steel mesh

Removal of Conjugated Polymer on Carbon Nanotube Array by Dry Process

The Fabrication of Macroscopical Long Aligned Carbon Nanotube Arrays