Abstract:In the present study, we report the systematic investigation of the effect of chemical oxidation on the structure of single-walled carbon nanotubes (SWNTs) by using different oxidants. The oxidation procedure was characterized by using infrared spectroscopy and transmission electron microscopy (TEM). The SWNTs were produced by chemical vapor deposition (CVD) and oxidized with three kinds of oxidants: (1) nitric acid (2.6 M), (2) a mixture of concentrated sulfuric acid (98 wt %) and concentrated nitric acid (16 M) (v/v = 3/1) and (3) KMnO4. The results reveal that the different functional groups can be introduced when the SWNTs are treated with different oxidants. Refluxing in dilute nitric acid can be considered as a mild oxidation for SWNTs, introducing the carboxylic acid groups only at those initial defects that already exist. The abundance of the carboxylic acid groups generated with this oxidant remained constant along with the treating time. In contrast, sonication of SWNTs in H2SO4/HNO3 increased the incidence of carboxylic acid groups not only at initial defect sites but also at newly created defect sites along the walls of SWNTs. Compared to the two oxidants above, when KMnO4 in alkali was used as the oxidant, which is relatively mild, different amounts of −OH, −CO, and −COOH groups were introduced. The oxidation processes begin mainly with the oxidation of the initial defects that arise during the CVD growth of the SWNTs and are accompanied by processes that can be roughly divided into two steps: (1) the defect-generating step and (2) the defect-consuming step. Specifically, during the defect-generating step, the oxidants attack the graphene structure by electrophilic reactions and generate active sites such as −OH and −CO. This step depends on the oxidant's ability to generate −C−OH groups and to transform them into −CO groups. During the defect-consuming step, the graphene structure of the tube was destroyed by the oxidation of the generated active sites in step 1. The defect-consuming step mostly counts on the ability of the oxidant to etch/destroy the graphite-like structure around the already generated −CO and their neighborhood groups.

Oxidation and Opening of Well-Aligned Carbon Nanotube Tips

Fabrication of Well-Aligned Tio2 Nanotube Arrays with Outstanding Light-Induced Hydrophilicity Performance

Aligned Carbon Nanotube Growth under Oxidative Ambient

In-situ Purification of Aligned Carbon Nanotube Arrays by H_2O_2

The release of free standing vertically-aligned carbon nanotube arrays from a substrate using CO2 oxidation

Wafer-scale Monodomain Films of Spontaneously Aligned Single-Walled Carbon Nanotubes

Electric field induced orientation-selective unzipping of zigzag carbon nanotubes upon oxidation.

Modifying Surface Structure to Tune Surface Properties of Vertically Aligned Carbon Nanotube Films

Directed Alignment of Carbon Nanotubes

Self-aligned Electrodes for Suspended Carbon Nanotube Structures

One-step Realization of Open-Ended TiO2 Nanotube Arrays by Transition of the Anodizing Voltage

Wet Purification of Aligned Carbon Nanotube Arrays and Its Impact on the Morphology of the Carbon Nanotube Arrays

Preparation of Well-aligned CNT Arrays Catalyzed with Porous Anodic Aluminum Oxide Template

Synthesis and Enhanced Field-Emission of Thin-Walled, Open-Ended, and Well-Aligned N-Doped Carbon Nanotubes

A Simple Chemical Method of Opening and Decorating Carbon Nanotubes by Polyvinyl Alcohol

Controlled Removal of Individual Carbon Nanotubes from Vertically Aligned Arrays for Advanced Nanoelectrodes

Preparation and Modification of Well-Aligned CNTs Grown on AAO Template

Oxidation-aided cap-removal of chemical vapor deposition-prepared single-wall carbon nanotubes

Efficient Fabrication of Carbon Nanotube Micro Tip Arrays by Tailoring Cross-Stacked Carbon Nanotube Sheets.

Effect of Chemical Oxidation on the Structure of Single-Walled Carbon Nanotubes

Chemical Alignment of Oxidatively Shortened Single-Walled Carbon Nanotubes on Silver Surface