Abstract:The study mainly investigates the effect of strain ratio on the multiaxial low cycle fatigue behaviour of 316L at 550 °C. The evolution of both axial and torsional stress amplitude is observed to go through three stages: cyclic hardening, softening and fracture. What's different is that the torsional loading experiences fewer cyclic hardening cycles compared to the axial loading. Regarding the interaction between axial and torsional stresses, it is observed that as the torsional strain increases, the axial deformation response presents a lower peak stress and a higher softening rate, while the torsional peak stress and softening rate hardly changes with the increase of axial strain amplitude. The fracture pattern is obtained through three-dimensional (3D) depth-of-field observation. It is discovered that as the strain ratio increases, the fracture pattern transits from tensile failure mode to shear failure mode. Furthermore, the orientation angle of the fracture surface increases and lies between the critical plane angle of maximum shear strain and maximum normal strain, indicating a mixed failure mode. Additionally, a comparison of nine representative critical plane models reveals that the energy-based models can better predict the multiaxial fatigue life influenced by the strain ratio. Finally, based on the analysis of deformation and failure mechanisms, a normal damage parameter weakening factor (NDWF) is introduced into the KBM-R model, and an improved normal stress component (INSC) is introduced into the Wu-R model. The two modified models well capture the impact of strain ratio and accurately predict the multiaxial fatigue life of both 316L and P92 steel.

Experimental Study on Evolution of Kinematic Hardening for Stainless Steel 304 under Uni-axial Strain Ratcheting Deformation

The low-cycle fatigue, deformation and final fracture behaviour of an austenitic stainless steel

Experimental study on uniaxial and nonproportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Variation In Mechanical Properties, Microstructures And Fracture Behavior Of 304 Stainless Steel During Low-Cycle Fatigue

Multi-scale Deformation Behavior Investigation of 18cr–8ni Austenitic Steel Subjected to Low-Cycle Fatigue Loading

Investigation of Cyclic Deformation Behavior in the Surface Layer of 18cr–8ni Austenitic Stainless Steel Based on Vickers Microhardness Measurement

Uniaxial and non-proportionally multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and simulations

A visco–plastic constitutive model incorporated with cyclic hardening for uniaxial/multiaxial ratcheting of SS304 stainless steel at room temperature

Non-proportionally multiaxial ratcheting of cyclic hardening materials at elevated temperatures: Experiments and simulations

Ratcheting deformation behavior of 316LN stainless steel under thermomechanical and isothermal loadings

A Noncyclic Method for Determination of Accumulated Strain in Stainless Steel 304 Pressure Vessels

Uniaxial Ratcheting Behavior and Molecular Dynamics Simulation Evaluation of 316LN Stainless Steel

Microstructure evolution and mechanical properties of martensite stainless steel during repetitive high stress Loading-Unloading with small plastic deformation

Uniaxial and non-proportionally multiaxial ratcheting of U71Mn rail steel: experiments and simulations

Cyclic behavior and damage mechanism of 304 austenitic stainless steel under different control modes

Cyclic deformation mechanism and fracture behaviour of 316L stainless steel under thermomechanical fatigue loading

Ratcheting Effect of 304 Stainless Steel Manufactured by Laser Metal Deposition Under Uniaxial Cyclic Stress

Investigation on Creep Deformation and Age Strengthening Behavior of 304 Stainless Steel under High Stress Levels

The strain ratio-dependent multiaxial low cycle fatigue behaviour and life prediction of 316L stainless steel based on critical plane at elevated temperature

Experimental Study on the Constitutive Relation of Austenitic Stainless Steel S 31608 under Monotonic and Cyclic Loading