Abstract:Force analysis of weaving yarns. Stress‐ strain curves and fractures sections of composites with different fabric structures under tensile load. Stress‐ strain curves and fracture mechanism of composites subjected to bending loads. The component yarns and fabrics effected the formability and stability of preforms, and finally determined the performance of corresponding composites. In this research, four typical fabric structures of carbon fiber resin composites (CFRC) were introduced to conduct the comparative investigation. The stability of component yarns in natural state and in fabrics have been discussed at mesoscopic scale, and the main methods to improve the structural stability of preforms were proposed. Composites with and without stable‐structural fibers and fabrics were manufactured by the modified curing process, and the yarn cross‐sections in specimens were analyzed. The tensile and bending performance of these composite specimens was comparatively conducted to discuss the influence of stable preforms on the elastic properties. The fracture mode and mechanism of specimens were illustrated in meso‐scale. The results depicted that yarns and fabrics with stable‐structural cross‐section could ensure a high fiber volume fraction, reducing the curvature of load‐bearing yarns, and effectively reduce the yarn curvature along bearing direction. The high interfacial bonding strength of composites with stable geometrical fabrics exhibited the excellent in‐plane mechanical properties, and presented the obvious brittle fracture characteristics when the fibers fully exert their load‐bearing capacity. Highlights Stable‐structural fibers result in the prominent performance of composites. Performance of composites with stable preforms show the low dispersion. Stable cross‐section of component yarns can enhance the stability of preforms. Low curvature yarns lead to brittle fracture characteristics of composites.

Investigation on Morphology and Property of Needled Carbon Cloth and Web Composite Fabric

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Effects of needle-punched felt structure on the mechanical properties of carbon/carbon composites

Surface Characteristics of Different Cross-Section Carbon Fibers and Its Effect on Interfacial Adhesion Properties of Composite

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

PREPARATION AND MECHANICAL PROPERTIES OF CARBON NANOTUBES/RESIN EPOXY COMPOSITE

Investigation of the mechanical and forming behaviour of 3D warp interlock carbon woven fabrics for complex shape of composite material

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Tensile Strength Prediction of Needle-Punched Carbon/carbon Composites

Role of stable‐structural yarns and fabrics on the tensile and bending performance of carbon fiber resin composites

Experimental study of tensile and flexural performances and failure mechanism of none-felt needled composites

Evaluation of high-modulus, puncture-resistance composite nonwoven fabrics by response surface methodology

Analysis of Mechanical Properties and Exploration of Failure Mechanism for Nonwoven Reinforced Composites

Study on the shear-pretension coupling behavior of 3D uniform and variable thickness woven fabrics

Analysis of Thermomechanical Behavior of the Tubular Braided Fabrics with Flax/Polyamide Commingled Yarns

A Study on the Mechanical and Tribological Properties of Carbon Fabric/PTFE Composites

Permeability testing and mechanism analysis of aramid fiber hybrid fabrics

The Effect of Single and Double-wefted Styles on the In-plane Impact Behavior of Fabric Carbon-aramid/Epoxy Intralayer Hybrid Composite Laminates

Friction Behavior between Carbon Fiber Plain Weave and Metal Semi-Cylinder Tool

In situ characterization of the flexural behavior and failure mechanism of 2D needle-punched carbon/carbon composites by digital image correlation