Abstract:Abstract: Adders are one of the most widely used digital components in digital integrated circuit design. With the advances in technology, the design that offers either high speed, low power consumption, less area, or a combination of them is designed. There are various processes performed by the digital circuits among which arithmetic operations are prominent. Three-operand binary adder is the basic functional unit to perform the modular arithmetic in various cryptography and pseudorandom bit generator (PRBG) algorithms. Carry save adder (CS3A) is the widely used technique to perform the three-operand addition. However, the ripple carry stage in the CS3A leads to a high propagation delay. Moreover, a parallel prefix two-operand adder such as Han-Carlson (HCA) can also be used for three-operand addition, significantly reducing the critical path delay at the cost of additional hardware. Hence, a new high-speed and area-efficient adder architecture is designed using pre-compute bitwise addition followed by carry prefix computation logic to perform the three-operand binary addition that consumes substantially less area, low power, and drastically reduces the adder delay. To design a faster computing system with less hardware we require some other architecture. The proposed architecture will reduce the area as well as the delay by replacing the Han-Carlson adder with the Ladner fisher adder in a Highspeed area-efficient three-operand binary adder. The proposed architecture is synthesized with the zynq-7000 library. The proposed architecture reduces the LUT count and delay by 20 and 0.4 nanoseconds respectively. By using these synthesis results, we noted the performance parameters like the number of LUTs and delay. We compared the adders in terms of LUTs (represents area) and delay value

A 64-bit fast adder with 0.18μm CMOS technology

Research and Implementation of Parallel Prefix Adder

High Quality Multiplier Design Based on Improved Circuits

A systematic design of novel energy efficient 64-bit parallel-prefix adder

Design of Low Power 64-Bit Hybrid Full Adder

A New Implementation of 16-bit Parallel Prefix Adder for High Speed and Low Area.

A High-Speed Carry-Select Adder with Optimized Block Sizes

The Implementation of 1-Ghz Bit-Stream Adder Used in Signal Processing in a 0.18-&Amp;#x03bc;m CMOS Technology

Design of VLIW Digital Signal Processor’s 64-bit Configurable Adder

Design of low-power and high-speed multiplier

Optimized design of fast floating-point adder

A new full adder design for tree structured arithmetic circuits

Design of High-Speed Area-Efficient VLSI Architecture of 32-Bit Three-Operand Binary Adder

A comparison of high-frequency 32-bit dynamic adders with conventional silicon and novel carbon nanotube transistor technologies

Design of Adder Based on Abacus Algorithm

The Design of the Asynchronous Abacus Adder

Design of high speed floating-multiplier

Low-Power Pass-Transistor Logic-Based Full Adder and 8-Bit Multiplier

An Algorithmic Approach for Generic Parallel Adders

Arithmetic Unit Design Using 180nm TSV-based 3D Stacking Technology

Novel low power full adder cells in 180nm CMOS technology