Abstract:The microstructural evolution of in-situ TiB2 nano-particle reinforced AlZnMgCu composites during hot extrusion was investigated from micro to macro scales by a combination of various techniques, including neutron and synchrotron X-ray diffraction, optical microscopy, scanning and transmission electron microscopy and electron backscatter diffraction (EBSD). The development of microstructure has shown a bimodal grain structure with distinctive spatial distributions of TiB2 particles: the elongated coarse grain structure with smaller dispersed particles and the fine grains mixed with clusters of relatively larger particles. The particle stimulated nucleation occurs at large particle clusters, resulting in recystallized (sub)micron sized fine grains. The dispersed smaller particles are observed to promote dislocation generation and to prohibit recovery. They are shown to reduce the misorientation of low angle grain boundaries due to the pinning effects on independent dislocations, which also lead to the suppression of dynamic recovery and increase of driving force for dynamic recrystallization. Quantitative texture analysis combined with neutron diffraction and EBSD has exhibited the development of a strong 〈111〉 and 〈001〉 dual fiber texture, and both texture volume fractions are changing with the particle content. In addition, the synchrotron diffraction experiments have shown that dislocation density increases with the particle content in both texture components. The microstructure evolution is the result from a complex process of particles/matrix interaction during the deformation and dynamic recrystallization. In comparison with its particle-free alloy counterpart, the thermomechanical response of the composites at high temperature is discussed in terms of aluminum deformation and recrystallization mechanisms combined with nanosized particle effects.

Micromorphology and distribution characteristics of IIR needles in TIB/Ti-Al composites

Synthesis and Fracture Characteristics of TiB2-TiAl Composites with a Unique Microlaminated Architecture

Microstructure evolution during preparation of in-situ TiB reinforced titanium matrix composites

Microstructural Characterization of Melt Extracted High-Nb-Containing TiAl-Based Fiber

Microstructure Study of Cold Rolling Nanosized In-Situ TiB2 Particle Reinforced Al Composites

Microstructure characterization and mechanical properties of TiB 2/TiAl in situ composite by induction skull melting process

Microstructure Of In Situ Tib/Ti Composite Component

Microstructural Characterization of Tib in in Situ Synthesized Titanium Matrix Composites Prepared by Common Casting Technique

Growth Morphology and Solidification Behavior of In-Situ Synthesized TiN and TiB

Fabrication, Microstructure Characterization and Fracture Behavior of a Unique Micro-Laminated TiB-TiAl Composites

Microstructure and Mechanical Properties of Electron Beam Freeform Fabricated TiB2/Al-Cu Composite

Microstructure and hardness of as-cast in situ TiB short fibre reinforced Ti-6Al matrix composites

Multi-scale Study of Microstructure Evolution in Hot Extruded Nano-Sized TiB2 Particle Reinforced Aluminum Composites

Constituentes and di.stribution of particle phases in Ti- 34Al matrix composites

Interfacial Microstructure of Tib/Ti in A Ti-Tib-Tic in Situ Composite

Microstructural Characterization of Spark Plasma Sintered in Situ Tib Reinforced Ti Matrix Composite by Ebsd and Tem

Microstructures and mechanical properties of in-situ TiB2/Al−xSi−0.3Mg composites

Quantitative Study of Particle Size Distribution in an In-Situ Grown Al–TiB2 Composite by Synchrotron X-ray Diffraction and Electron Microscopy

Microstructural Characterisation Ofin Situtib/ti Matrix Composites Prepared by Mechanical Alloying and Hot Pressing

Effects of Nanosized Particles on Microstructure and Mechanical Properties of an Aged In-Situ TiB2/Al-Cu-Li Composite

Microstructural Characterization and Ablation Mechanism of TiB2/(Cu,Ni) Melt-Infiltrated Ceramic Composite