Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

Quadrature direct digital frequency synthesizers with super high memory compression ratio and its parameter optimization

Optimized Design of Direct Digital Frequency Synthesizer Based on Hermite Interpolation

A High-Performance MUX-direct Digital Frequency Synthesizer with Quarter ROMs

An 18-Bit High Performance Audio Sigma-Delta D/A Converter

A Novel 3780-Point FFT Processor Scheme for the Time Domain Synchronous OFDM System

Implementation of direct digital frequency synthesizer based on three-step rotation coordinate rotation digital computer algorithm

High-performance All-Digital Quadrature Frequency Synthesizer/mixer

A ROM-less direct digital frequency synthesizer based on hybrid polynomial approximation

A new DDFS based on unequal length piecewise linear approximation with one bit error correction

A Low Power ROM-less Direct Digital Frequency Synthesizer with Preset Value Pipelined Accumulator

Research on a Low-power Direct Digital Frequency Synthesis

A 2ghz Direct Digital Frequency Synthesizer Based on Multi-Channel Structure

Design of low-power and high-speed multiplier

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

A 2.4-Ghz ΔΣ Fractional-N Synthesizer with Space-Time Averaging for Noise Reduction

Design of a Digital Front End in All-Digital Quadrature-Transmitter

A 2.2-Ghz Configurable Direct Digital Frequency Synthesizer Based on LUT and Rotation

The Implement Of Digital Front End In All-Digital Quadrature Rf Transmitter

A 2-GHz Direct Digital Frequency Synthesizer Based on LUT and Rotation

An Efficient Digital Front-End for 16-Bit Audio Delta-Sigma D/A Converter

A 174.3-Db FoM VCO-Based CT $\delta \sigma $ Modulator with a Fully-Digital Phase Extended Quantizer and Tri-Level Resistor DAC in 130-Nm CMOS