Abstract:In this article, we present a four-channel direct digital synthesis (DDS) design that operates with a common clock ranging from 500 MHz to 24 GHz and generates output frequencies up to 1.75 GHz. A key feature of this board is its custom field-programmable gate array (FPGA)-based synchronization method, which ensures alignment accuracy of 170 ps between the channels, enabling precise frequency and phase relationship settings. In addition, the DDS board incorporates a user-friendly web interface that allows for continuous control and monitoring capabilities over TCP/IP. Multiple synchronized channels can be power-combined to produce a low-phase noise output due to coherent addition of the common carriers and the noncoherent addition of the residual DDS noise. By exploiting these principles and combining eight parallel channels of two DDS boards, we achieve exceptional residual phase noise performance, with L(1Hz)=-147dBc/Hz and L(100kHz)=-180dBc/Hz for a 9.765625 MHz output signal. These noise levels surpass the previously reported results achieved with regenerative frequency dividers. We also present a method for obtaining accurate residual noise measurements using an absolute phase modulation (PM) noise and amplitude modulation (AM) noise nalyse. Furthermore, we nalyse the phase alignment tolerances required to minimize the AM-to-PM and PM-to-AM conversion that commonly occurs in power-combined signals. Finally, we demonstrate the synthesis of a highly stable 9.765625 MHz signal obtained from a cavity-stabilized optical frequency comb (OFC), with an absolute white phase noise of -180 dBc/Hz.

Research on a Low-power Direct Digital Frequency Synthesis

A Low Power ROM-less Direct Digital Frequency Synthesizer with Preset Value Pipelined Accumulator

Research and Implementation of A Low-power High-linearity Audio ΣΔ ADC In 65nm Process

Optimized Design of Direct Digital Frequency Synthesizer Based on Hermite Interpolation

A new DDFS based on unequal length piecewise linear approximation with one bit error correction

A Low-Spurious Direct Digital Frequency Synthesis Based on FPGA

A ROM-less direct digital frequency synthesizer based on hybrid polynomial approximation

A High-Performance MUX-direct Digital Frequency Synthesizer with Quarter ROMs

A 2ghz Direct Digital Frequency Synthesizer Based on Multi-Channel Structure

A 2-GHz Direct Digital Frequency Synthesizer Based on LUT and Rotation

A 1.2V Low-Power Multi-Band Mixing Frequency Synthesizer for FDD System

A DCO-Based Configurable Digital Frequency Synthesizer

Ultra-Low Phase Noise Frequency Division With Array of Direct Digital Synthesizers

A Power Scalable PLL Frequency Synthesizer for High-Speed Δ—Σ ADC

A 2.2-Ghz Configurable Direct Digital Frequency Synthesizer Based on LUT and Rotation

Design of Improved Dds Signal Generator Based on Amplitude to Phase Sampling

Study of Double Channel Arbitrary Wave Generator Based on Direct Digital Frequency Synthesis

High-performance All-Digital Quadrature Frequency Synthesizer/mixer

Design of FM Signal Generator Based on DDS Technique and Implementation with FPGA

High-Order Sigma-Delta Modulation Based Direct Digital Frequency Synthesizer

Design and Experiments of a Waveform Generator Based on DDS Technology