Abstract:Pure aluminum electrodes were treated in alkaline stannate solutions, and the effects of some factors such as NaOH content and treating time were explored. The corrosion and electrochemical performances of the modified aluminum anodes in 4.0M KOH methanol–water mixed solutions containing a methanol/water volume ratio of 7:3 (30% water) with and without stannate were investigated by means of hydrogen collection, polarization curve, galvanostatic discharge, scanning electron microscopy (SEM), and energy dispersive analysis of X-ray (EDAX). Metallic tin with high hydrogen evolution overpotential was deposited in aluminum surfaces by the modification treatments using stannate, resulting in the relatively low corrosion rate and markedly enhanced discharge performance of the modified aluminum anodes. In our experimental range the aluminum electrode treated in the solution with 0.1M NaOH for 30min showed lower corrosion rate and better discharge performance. The addition of Na2SnO3 in 4.0M KOH methanol–water mixed solutions with 30% water inhibited the corrosion of the aluminum electrodes modified in the treating solution with 0.1M NaOH for 30min, resulting from the deposition of tin with high hydrogen evolution overpotential in aluminum surfaces. The deposition of metallic tin on the electrode surface and the existence of stannate in the electrolytes were responsible for the notable enhancement in the discharge performance of the modified aluminum anode.

EFFECT OF ADDITIVE K2MnO4 ON ELECTROCHEMICAL BEHAVIOUR OF ALUMINUM ANODE IN ALKALINE SOLUTION

Effects of Additives in the Alkaline Electrolyte on Anode Behavior of Aluminum

Effect of Potassium Fluoride in Electrolytic Solution on the Structure and Properties of Microarc Oxidation Coatings on Magnesium Alloy

Effects of NaAlO2 on Structure and Corrosion Resistance of Microarc Oxidation Coatings Formed on AM60B Magnesium Alloy in Phosphate–koh Electrolyte

Electrochemical behaviour of aluminum in alkaline solution

The Corrosion and Electrochemical Behavior of Pure Aluminum in Additive‐containing Alkaline Methanol–water Mixed Solutions

Effects of Electrolyte Additives on Behavior of Al-In-Ga-Pb Alloy Anode

Corrosion and Anodic Behaviors of Pure Aluminum in a Novel Alkaline Electrolyte

Effect of Several Inorganic Additives on Microstructure and Properties of Microarc Oxidation Coating on Aluminium Alloy

Corrosion and Electrochemical Behaviors of Aluminum Anode in Alkaline Ethanol Organic Solution

Electrochemical Properties of Aluminum Anode in Alkaline Organic Solution

Influences of Zinc Oxide and an Organic Additive on the Electrochemical Behavior of Pure Aluminum in an Alkaline Solution

EFFECT OF KOH ON MICRO-ARC OXIDATION COATINGS OF 2A12 ALUMINUM ALLOYS IN CH3COONa–Na2WO4 ELECTROLYTE

Influence of concentration of KOH solution containing 0.02 M borohydride on the kinetic properties of hydrogen storage alloys

The Effects of Surface Treatment and Stannate As an Electrolyte Additive on the Corrosion and Electrochemical Performances of Pure Aluminum in an Alkaline Methanol–water Solution

The Effects of Na2WO4 Concentration on the Properties of Microarc Oxidation Coatings on Aluminum Alloy

The Effect of the C4O6H4KNa Concentration on the MAO Coating of the Mg-Sr-Al-Y Alloy

The effects of polyethylene glycol (PEG) as an electrolyte additive on the corrosion behavior and electrochemical performances of pure aluminum in an alkaline zincate solution

Effect of LiAlO2and KF on Physicochemical Properties for Industrial Aluminum Electrolyte

Influence of K 2TiF 6 in electrolyte on characteristics of the microarc oxidation coating on aluminum alloy

Effects of heat treatment on the performance of aluminum anode in KOH solutions