Abstract:<p>The effects of geometric and thermal properties of multilayer nominal three-dimensional chip on the temperature hotspots are investigated in this work. Based on heat-transfer computational fluid dynamic analysis, various effective parameters which correlate with reducing the hotspot temperature are studied. A new analytical method for the equivalent thermal conductivity of the thermal interface material (TIM) layer and the chip layer structure in the multilayer chip is proposed, the deviation between the present results and the prior literature is less than 2%. For different chip structures and through silicon vias (TSV) arrangements, the higher the number of multi-layer chips subject to a low Reynolds number, the higher the hotspot temperature. The hotspot temperature gradually decreases linearly with an increase in the Reynolds number. For a convective cooling environment, comparing the two cases with and without the TSV, the variation of Nusselt number for the chip package surface facing the coolant is less than 1. The staggered core structure has a lower hotspot temperature for the no TSV case. When the Core-Centralized TSV is introduced, the overlapping core structure influences the internal heat dissipation the most. When the Reynolds number increases to 2000 and the number of chip layers is greater than 10, the hotspot temperature is almost insensitive to the chip layer and the hotspot temperature difference among different multilayer 3D chips does not exceed 0.2%. The layer where the hotspot temperature exists is different for different TSV arrangements.</p>

A hot-spot identification method in VLSI BBL placement

Thermal Constraints for BBL Placement

VLSI Thermal Placement Optimization Using Simulated Annealing

Power-and thermal-aware mapping for NoC under latency constraint

A Low Computational Cost and Accurate Thermal Calculation Method for Multi-hotspot IC

Thermal-aware Cell and Through-Silicon-via Co-Placement for 3D ICs.

Lithography Hotspot Detection and Mitigation in Nanometer VLSI

System-Level Analysis of 3D ICs with Thermal TSVs

An Analytical Placement Framework for 3-D ICs and Its Extension on Thermal Awareness

A Thermal-Driven Force-Directed Macro Cell Placement Algorithm

Self-heating effects in integrated circuits with hot spot method and electro-thermal coupling method

Thermal aware placement in 3D ICs using quadratic uniformity modeling approach

Analysis of hotspots and cooling strategy for multilayer three-dimensional integrated circuits

LP Based White Space Redistribution for Thermal Via Planning and Performance Optimization in 3D ICs

Thermal-Aware 3d Placement

Thermal-Aware Incremental Floorplanning for 3D ICs Based on MILP Formulation.

Algorithm Research on VLSI Placement

Thermal-Aware Post Layout Voltage-Island Generation for 3D ICs

Optimizing the heat source layout of chips using bionic method: Reduction of junction temperature

A Novel Thermal Optimization Flow Using Incremental Floorplanning for 3D ICs

Study on Self-Heat Effects in Integrated Circuits with Hot-Spot and Electro-Thermal Coupling Methods