Abstract:Two control schemes are proposed to control dynamic plants with time delay and double integrators. One adopts the H-2 optimal controller, whereas the other utilises a conventional derivative controller for the setpoint tracking in an open-loop control manner. Both of the proposed control schemes are of the two-degree-of-freedom control structure and use an identical disturbance estimator to construct the closed-loop between the plant input and output for load disturbance rejection. In consequence, the setpoint response is decoupled from the load disturbance response. The disturbance estimator is obtained by proposing a desired closed-loop complementary sensitivity function according to the H-2 optimal performance objective. The closed-loop robust stability is analysed and corresponding sufficient and necessary conditions are also provided in the presence of the plant multiplicative uncertainty. Consequently a rule-of-thumb for tuning the single adjustable parameter of the disturbance estimator is presented. Finally, illustrative examples are included to show that a good performance can be obtained using the two proposed control schemes, especially the proposed closed-loop for the load disturbance rejection, which can also be successfully utilised to reject ramp-type load disturbances in industrial and chemical processes with one integrator.

A Two-Degree-Of-Freedom Ratio Control Scheme

A ratio control scheme decoupling disturbance response from set-point response.

Study On Feedback Control Strategy Of Generalized Load System

PID-like Coupling Control of Underactuated Overhead Cranes with Input Constraints

Analytical design of two-degree-of-freedom control scheme for open-loop unstable processes with time delay

Decoupled Adaptive Terminal Sliding Mode Control Strategy for a 6-DOF Electro-Hydraulic Suspension Test Rig with RBF Coupling Force Compensator

Decoupling two-degree-of-freedom control strategy for cascade control systems

Robust Two-Degree-of-freedom Internal Model Control

TWO-DEGREE-OF-FREEDOM CONTROL SCHEME FOR PROCESSES WITH LARGE TIME DELAY

Two-Degrees-of-Freedom Decoupling Control for Stable Multivariable Processes

A new two-degree-of-freedom level control scheme.

A Novel Control Scheme for Typical Unstable Processes with Time Delay

Analytical Design Of New Two-Degree-Of-Freedom Controller For Integrating Processes

Double-Controller Scheme for Separating Load Rejection from Set-Point Tracking

Analytical Decoupling Control Design for Dynamic Plants with Time Delay and Double Integrators

Application of Desired Dynamic Equation Method in Control of Four-tank Liquid-level System

Design of Modified 2-Degree-of-freedom Proportional–integral–derivative Controller for Unstable Processes

A Two-Degree-of-Freedom Control Strategy for Unstable Process with Time Delay

Analytical two-degrees-of-freedom (2-DOF) decoupling control scheme for multiple-input - multiple-output (MIMO) processes with time delays

The two-degree-of-freedom parallel control for inverse response plus time delay

Two-degrees-of-freedom PID Controller Tuning Method