Abstract:A pneumatic parallel platform driven by an air cylinder and three circumambient pneumatic muscles was considered. Firstly, a mathematical model of the pneumatic servo system was developed for the MIMO nonlinear model-based controller designed. The pneumatic muscles were controlled by three proportional position valves, and the air cylinder was controlled by a proportional pressure valve. As the forward kinematics of this structure had no analytical solution, the control strategy should be designed in joint space. A cross-coupling integral adaptive robust controller (CCIARC) which combined cross-coupling control strategy and traditional adaptive robust control (ARC) theory was developed by back-stepping method to accomplish trajectory tracking control of the parallel platform. The cross-coupling part of the controller stabilized the length error in joint space as well as the synchronization error, and the adaptive robust control part attenuated the adverse effects of modelling error and disturbance. The force character of the pneumatic muscles was difficult to model precisely, so the on-line recursive least square estimation (RLSE) method was employed to modify the model compensation. The projector mapping method was used to condition the RLSE algorithm to bound the parameters estimated. An integral feedback part was added to the traditional robust function to reduce the negative influence of the slow time-varying characteristic of pneumatic muscles and enhance the ability of trajectory tracking. The stability of the controller designed was proved through Laypunov’s theory. Various contrast controllers were designed to testify the newly designed components of the CCIARC. Extensive experiments were conducted to illustrate the performance of the controller.

PID-like Coupling Control of Underactuated Overhead Cranes with Input Constraints

A De Based Pid Controller For Two Dimensional Overhead Crane

A New Robust Adaptive Control of Uncertain Nonlinear Systems and Pendulum Application

Robust Immersion and Invariance Adaptive Coordinated Control for a Class of Biaxial Gantry Systems

Nonlinear coupling control method for underactuated three-dimensional overhead crane systems under initial input constraints

Cross-coupling Integral Adaptive Robust Posture Control of a Pneumatic Parallel Platform

Adaptive Neural Networks Control and Learning for Overhead Crane Systems

Collaborative Simulation and Integrated CMAC and PID Optimization and Control of an Aerial Work Platform

Lyapunov approach for the control of overhead crane systems with double-pendulum dynamics and uncertain disturbances

Control Of Underactuated Bridge Cranes: A Simplified Ida-Pbc Approach

Cooperative control of a nonuniform gantry crane with constrained tension

Research on adaptive coupling trajectory tracking anti-swing control strategy for three-dimensional double-pendulum overhead crane

Anti-swing Control for 2-D Under-Actuated Cranes with Load Hoisting/lowering: A Coupling-Based Approach.

Finite-time model-free robust synchronous control of multi-lift overhead cranes based on iterative learning

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

Decoupled linear model and S-shaped curve motion trajectory for load sway reduction control in overhead cranes with double-pendulum effect

Asymmetric Input-Output Constraint Control of a Flexible Variable-Length Rotary Crane Arm

A Double-Sliding Surface Based Control Method for Underactuated Cranes

Direct Optimization Based Compensation Adaptive Robust Control of Nonlinear Systems with State and Input Constraints

Robust Adaptive Iterative Learning Control for Discrete‐time Nonlinear Systems with Both Parametric and Nonparametric Uncertainties

Linear Active Disturbance Rejection Control for Double-Pendulum Overhead Cranes