Abstract:Two control schemes are proposed to control dynamic plants with time delay and double integrators. One adopts the H-2 optimal controller, whereas the other utilises a conventional derivative controller for the setpoint tracking in an open-loop control manner. Both of the proposed control schemes are of the two-degree-of-freedom control structure and use an identical disturbance estimator to construct the closed-loop between the plant input and output for load disturbance rejection. In consequence, the setpoint response is decoupled from the load disturbance response. The disturbance estimator is obtained by proposing a desired closed-loop complementary sensitivity function according to the H-2 optimal performance objective. The closed-loop robust stability is analysed and corresponding sufficient and necessary conditions are also provided in the presence of the plant multiplicative uncertainty. Consequently a rule-of-thumb for tuning the single adjustable parameter of the disturbance estimator is presented. Finally, illustrative examples are included to show that a good performance can be obtained using the two proposed control schemes, especially the proposed closed-loop for the load disturbance rejection, which can also be successfully utilised to reject ramp-type load disturbances in industrial and chemical processes with one integrator.

Analytical Design Of New Two-Degree-Of-Freedom Controller For Integrating Processes

Analytical design of two-degree-of-freedom control scheme for open-loop unstable processes with time delay

Design of Modified 2-Degree-of-freedom Proportional–integral–derivative Controller for Unstable Processes

TWO-DEGREE-OF-FREEDOM CONTROL SCHEME FOR PROCESSES WITH LARGE TIME DELAY

Analytical Decoupling Control Design for Dynamic Plants with Time Delay and Double Integrators

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

Optimal Disturbance Rejection Controller Design for Integrating Processes with Dead Time Based on Algebraic Theory

Analytical Design of PI/PID Controllers for Double-Loop Control Systems

Analytical Multiloop PI/PID Controller Design for Two-by-Two Processes with Time Delays

A New Method for Designing Analytical Non-Diagonal PID Controller for Two-by-two Processes with Time Delays

A Novel Control Scheme for Typical Unstable Processes with Time Delay

A new two-degree-of-freedom level control scheme.

Robust Two-Degree-of-freedom Internal Model Control

Two-Degrees-of-Freedom Decoupling Control for Stable Multivariable Processes

Analytical design for open loop unstable processes with time delay

Control of Integrator Processes with Dominant Time Delay

H∞ Design of 2D Controller for Batch Processes with Uncertainties and Interval Time-Varying Delays

Discrete PID Control for Integrator Processes with Time Delay

Optimal Design of the Refined Ziegler−Nichols Proportional-Integral-Derivative Controller for Stable and Unstable Processes with Time Delays

Desired-dynamics-based Design of Control Strategy for Multivariable System with Time Delays

Optimal Disturbance Rejection Design for Doubly Integrating Plants with Time Delay