Abstract:The isothermal tensile test of medium carbon steel material was conducted at deformation temperatures varying from 650 to 950 ∘ C with an interval of 100 ∘ C and strain rates ranging from 0.05 to 1.0 s − 1 . In addition, the scanning electron microscopy (SEM) procedures were exploited to study about the surface morphology of medium carbon steel material. Using the experimental data, the artificial neural network (ANN) model with a back-propagation (BP) algorithm was proposed to predict the hot deformation behavior of medium carbon steel material. For model training and testing purpose, the variables such as deformation temperature, strain rate, and strain data were considered as inputs and the flow stress data were used as targets. Before running the neural network, the test data were normalized to effectively run the problem and after solving the problem, the obtained results were again converted in order to achieve the actual data. According to the predicted results, the coefficient of determination ( R 2 ) and the average absolute relative error between the predicted flow stress and the experimental data were determined as 0.999 and 1.335%, respectively. For improving the model predictability, the constrained nonlinear function based optimization procedures was adopted to obtain the best candidate selections of weights and biases. By evaluating each test conditions, it was found that the average absolute relative error based on the optimized ANN-BP model varied from 0.728% to 1.775%. Overall, the trained ANN-BP models proved to be much more efficient and accurate by means of flow stress prediction against the experimental data for all the tested conditions. These optimized results displayed that an ANN-BP model is more accurate for flow stress prediction than that of the conventional flow stress models.

Prediction of the flow stress for 30 MnSi steel using evolutionary least squares support vector machine and mathematical models

Application of a Hybrid Model in the Prediction of the Flow Stress of 30 MnSi Steel

An evolutionary hybrid model for the prediction of flow stress of steel

Application of improved EMD-Elman neural network to predict silicon content in hot metal

Melt Index Prediction by Weighted Least Squares Support Vector Machines

The Prediction of Flow Stress in the Hot Compression of a Ni-Cr-Mo Steel Using Machine Learning Algorithms

Comparison Between Four Flow Stress Models Characterizing the Constitutive Behavior of Hot Deformation of 40mn Steel

Application of Least Squares Support Vector Machines to Predict the Silicon Content in Blast Furnace Hot Metal

Prediction on Hot Deformation Flow Stress of Medium-carbon Micro-alloyed Steels with Vanadium Based on Artificial Neural Network

Prediction of flow stress in Mg-3Dy alloy based on constitutive equation and PSO-SVR model

Hybrid Machine Learning Optimization Approach to Predict Hot Deformation Behavior of Medium Carbon Steel Material

Comparative Study of Accurate Descriptions of Hot Flow Behaviors of BT22 Alloy by Intelligence Algorithm and Physical Modeling

Comparison and error evaluation of Arrhenius model and typical machine learning algorithms for high-temperature flow stress prediction of GH3536 superalloy

Prediction of Flow Stress of Annealed 7075 Al Alloy in Hot Deformation Using Strain-Compensated Arrhenius and Neural Network Models

Flow Stress Models for 40Cr10Si2Mo Steel and Their Application in Numerical Simulation of Hot Forming

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Predicting Flow Stress Behavior of an AA7075 Alloy Using Machine Learning Methods

On the Prediction of Flow Stress Behavior of Additively Manufactured AlSi10Mg for High Temperature Applications

Modeling the Double-Pass Flow Curve of Nb Micro-Alloyed Steel by Machine Learning and Its Extrapolation to Static Softening Kinetics

Prediction of line heating deformation on sheet metal based on an ISSA–ELM model

Numerical Simulation and Analytical Prediction of Residual Strength for Elbow Pipes with Erosion Defects