Abstract:In order to predict flow behavior and find the optimum hot working processing parameters for 5754 aluminum alloy, the experimental flow stress data obtained from the isothermal hot compression tests on a Gleeble-3500 thermo-simulation apparatus, with different strain rates (0.1⁻10 s⁻1) and temperatures (300⁻500 &deg;C), were used to construct the constitutive models of the strain-compensation Arrhenius (SA) and back propagation (BP) artificial neural network (ANN). In addition, an optimized BP⁻ANN model based on the genetic algorithm (GA) was established. Furthermore, the predictability of the three models was evaluated by the statistical indicators, including the correlation coefficient (R) and average absolute relative error (AARE). The results showed that the R of the SA model, BP⁻ANN model, and ANN⁻GA model were 0.9918, 0.9929, and 0.9999, respectively, while the AARE of these models was found to be 3.2499⁻5.6774%, 0.0567⁻5.4436% and 0.0232⁻1.0485%, respectively. The prediction error of the SA model was high at 400 &deg;C. It was more accurate to use the BP⁻ANN model to determine the flow behavior compared to the SA model. However, the BP⁻ANN model had more instability at 300 &deg;C and a true strain in the range of 0.4⁻0.6. When compared with the SA model and BP⁻ANN model, the ANN⁻GA model had a more efficient and more accurate prediction ability during the whole deformation process. Furthermore, the dynamic softening characteristic was analyzed by the flow curves. All curves showed that 5754 aluminum alloy showed the typical rheological characteristics. The flow stress rose rapidly with increasing strain until it reached a peak. After this, the flow stress remained constant, which demonstrates a steady flow softening phenomenon. Besides, the flow stress and the required variables to reach the steady state deformation increased with increasing strain rate and decreasing temperature.

An evolutionary hybrid model for the prediction of flow stress of steel

Application of a Hybrid Model in the Prediction of the Flow Stress of 30 MnSi Steel

Prediction of the flow stress for 30 MnSi steel using evolutionary least squares support vector machine and mathematical models

Application of improved EMD-Elman neural network to predict silicon content in hot metal

Hybrid Machine Learning Optimization Approach to Predict Hot Deformation Behavior of Medium Carbon Steel Material

Hybrid modeling with finite element—analysis—neural network for predicting residual stress in orthogonal cutting of H13

Prediction of Flow Stress of Annealed 7075 Al Alloy in Hot Deformation Using Strain-Compensated Arrhenius and Neural Network Models

Prediction of the mechanical behavior of steel-aluminum flow drill screw joints using artificial neural network

A Multi-Fidelity Prediction Model for Vertical Bending Moment and Total Longitudinal Stress of a Ship Based on Composite Neural Network

A Modified Back Propagation Artificial Neural Network Model Based on Genetic Algorithm to Predict the Flow Behavior of 5754 Aluminum Alloy

Rotating machinery flow field prediction based on hybrid neural network

The Prediction of Flow Stress in the Hot Compression of a Ni-Cr-Mo Steel Using Machine Learning Algorithms

A prediction model of wall shear stress for ultra-high-pressure water-jet nozzle based on hybrid BP neural network

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Hybrid deep neural network based prediction method for unsteady flows with moving boundary

Comparison Between Four Flow Stress Models Characterizing the Constitutive Behavior of Hot Deformation of 40mn Steel

Towards an Optimized Artificial Neural Network for Predicting Flow Stress of In718 Alloys at High Temperatures

Predicting High Temperature Flow Stress of Nickel Alloy A230 Based on an Artificial Neural Network

Application of Artificial Neural Network to Predict Flow Stress of As Quenched A357 Alloy

Prediction of flow stress of BT20 titanium alloy by BP neural network