Abstract:In this study, K 2 TiF 6 and C powder (Ti:C atomic ratio 1:1) are introduced into Al-Si-Fe alloy by contact reaction method. The focus of this study is to investigate the reaction and precipitation behavior of Ti source in the alloy melt, and the effect of reaction products on the microstructure and properties of Al-Si-Fe alloy. The results show that the reaction products formed between Ti and the matrix alloy can destroy the acicular β-Fe phase in the original alloy. The transformation results in the a morphological change of the alloy from needle-like structure to Chinese script and fishbone-like structure, which effectively improves the mechanical properties of the alloy. The DSC analysis results indicate that Al-Si- Fe powder, K 2 TiF 6 powder, and C powder undergo significant exothermic reactions at around 950 °C, corresponding to the formation of TiC. Further microscopic morphology observations support the inference that TiC powders formed in this temperature range. Firstly, the synthesis of the matrix takes place at 580 °C. K 2 TiF 6 mixed with alloy powder shows an obvious exothermic peak at 660 °C, corresponding to the formation of the second phase Al 3 Ti by wetting and chemical reaction. However, it is worth noting that the reaction intermediate product(Al 4 C 3 phase) consumes three times as much Al 3 Ti as itself. As a result, the exothermic peak generated by Al 3 Ti disappears. Lastly, a long-term exothermic reaction that takes place above 850 °C lead to the gradual replacement of the Al 3 Ti phase by TiC particles. The mechanical properties test indicates that the needle-shaped Al 3 Ti to some extent deteriorates the alloy's properties. But the final product (TiC) can offset the deteriorating effect of Al 3 Ti and restore the alloy's property.

Effect of Al Addition on Synthesis of the Ti3SiC2by Vacuum Sintering

Effect of Sn and Si on the Synthesis of Ti<sub>3</sub>Al(Sn/Si)C<sub>2</sub> by Self-Propagating High-Temperature Sintering

Effect of Al Addition on Phase Purity of Ti3Si(Al)C2 Synthesized by Mechanical Alloying

Effects of TiAl3 addition on combustion synthesis of Ti3AlC

Effect of Aluminum on Fabrication of Ti3SiC2 by Mechanical Alloying and Spark Plasma Sintering

Effects of different Ti/C and Al contents on combustion synthesized Ti3AlC2 powders in the Ti-Al-C system

Effects of TiAl additions on combustion synthesis of Ti3AlC2 powders

A possible mechanism on synthesis of Ti3AlC2

Effects of different Al contents on combustion synthesis of Ti3AlC2 powders in the Ti-Al-C system

Synthesis of Ti<sub>3</sub>SiC<sub>2</sub> Bulk Materials with B<sub>2</sub>O<sub>3</sub> Additive

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites

A synthesis method of Ti3AlC2 ceramic

Effects of Tial3 Addition in Ti-Al-C System on Combustion Synthesis of Ti3alc2 Powders

In Situ Synthesis of Ti2AlC–Al2O3/TiAl Composite by Vacuum Sintering Mechanically Alloyed TiAl Powder Coated with CNTs

Reaction synthesis of Al/TiC composites and the effect of Al content

Synthesis of Ti3SiC2 Bulk Materials with B2O3 Additive

Formation mechanism of Ti3AlC2 in TiO2–Al–C/TiC systems at high temperatures

Effect of Si and Holding Time on Ti2Al20La Phase in Al-Ti-La Intermediate Alloy

EFFECTS OF TiAl ADDITION ON COMBUSTION SYNTHESIS OF Ti_2AlC

Thermodynamic Investigation on K2TiF6 and C Powder to Prepared in-situ TiCp in Molten Al-Si-Fe Alloy

Reactive Synthesis of Polycrystalline Ti3AlC2 and Its Sintering Behavior