Abstract:For the rock slope without a definite sliding surface，finding the position of the most dangerous sliding surface with planar failure and critical inclination is beneficial to accurately assess the stability of the slope and to the design of slope engineering. The mechanical model of rock slope with a planar failure considering the water pressure is established，and the unified analytical solution of the critical inclination is obtained by minimizing the value of a certain function. The reasonable form of water pressure distribution on the sliding surface is adopted and the detailed analytical solution of critical inclination is obtained considering the facts whether the front edge of the slope is blocked，whether a tension crack exists at the back edge of the slope，whether the sliding surface is filled with water，etc. The analysis results indicate that within a certain range，the critical inclination increases with the the height of the slope，the slope angle，the internal friction angle of the sliding surface，the unit weight and the height of the water table. The higher the cohesion of the sliding surface，the lower the critical inclination. The critical inclination is firstly increased and then decreased with the depth of the tension crack. There are differences in the critical inclination obtained with the different models of hydraulic pressure distribution. The drainage conditions of the slope have a significant influence on the critical inclination. A program calculating the critical inclination was written according to the established analytical solution.

Locating Sritical Slip Surfaces by a Method Combining Monte Carlo Technique and FEM

SLOPE STABILITY ANALYSIS USING MONTE CARLO TECHNIQUE WITH FEM

Locating Global Critical Slip Surface Using the Morgenstern-Price Method and Optimization Technique

Efficient Reliability Analysis of Slopes Integrating the Random Field Method and a Gaussian Process Regression‐based Surrogate Model

Analytical calculation of the critical inclination of rock slopes with a planar failure surface under water pressure

LOCATING NON-CIRCULAR CRITICAL SLIP SURFACES BY PARTICLE SWARM OPTIMIZATION ALGORITHM

Extended Algorithm Using Monte Carlo Techniques for Searching General Critical Slip Surface in Slope Stability Analysis

Locating the critical slip surface in a slope stability analysis by enhanced fireworks algorithm

Modified Monte Carlo Techniques by Rotating Slip Segments for Searching General Critical Slip Surface(ⅰ): Random Angle of Rotation

An Efficient Approach for Locating the Critical Slip Surface in Slope Stability Analyses Using a Real-Coded Genetic Algorithm

Determination of Slope Safety Factor with Analytical Solution and Searching Critical Slip Surface with Genetic-Traversal Random Method

Searching slope critical slip surface based on the NMM and equivalent plastic strain

Genetic algorithm for searching for critical slip surface in soil slopes based on stress fields

Combination of slices method and FEM for slope stability analysis of foundation pit under the seepage condition

Slope Stability Analysis Based on the Coupled Eulerian-Lagrangian Finite Element Method

Analysis of slope slip surface by three-dimension finite element method

Generating Slip Surfaces Using the Logistic Function Integral

The extended Monte Carlo techniques by rotating slip segments for searching general critical slip surface (II): Constant angle of rotation

Modified Slip Surface Stress Method for Potential Slip Mass Stability Analysis

A novel framework for ascertaining the safety factor and critical slip surface of 3D slopes reinforced with piles

A LIMIT EQUILIBRIUM METHOD BASED ON MORGENSTERN-PRICE METHOD FOR 3D SLOPE STABILITY ANALYSIS