Abstract:A simplified numerical method was proposed for computing the slip-line field, as well as the associated earth-pressure coefficient, in a cohesionless backfill with an inclined surface lying behind an inclined rough wall. The potential failure zone, in either active or passive cases, was divided into the Rankine zone, which was rigorously obtained by the theory of plasticity, and the transition zone being further divided into a series of triangular slices. Within the transition zone, the theoretical relationship between the inclination of the interslice force and that of the slip surface was established by satisfying the Mohr-Coulomb failure criterion, and equations involving the forces on a typical slice were formulated in accordance with the force and moment equilibrium conditions. An iterative procedure was presented for computing the lateral forces on the wall by adjusting the inclination of the slip surface until the stress condition on the upper boundary of the transition zone was satisfied, resulting in the two families of slip lines. Several examples demonstrate the slip-line field configurations, and the computed earth-pressure coefficients were found to agree fairly well with those of other numerical methods. Practical Applications The determination of earth pressures and the associated critical failure surface play an important role in the design of retaining walls and other problems of geotechnical engineering. Conventional methods are frequently used for this purpose, but the errors involved are sometimes unacceptably large in cases of inclined rough walls. Hence, certain numerical methods have been employed, which, despite their sophistication, have not yet approached exact solutions. This paper presents a simplified numerical procedure for approaching theoretical slip-line fields and earth-pressure coefficients for the most frequently encountered cases of inclined rough walls with inclined cohesionless backfills. With this method, no assumptions need to be made about the shape of the slip surface or the inclinations of the forces acting on the boundaries of the triangular slices, into which the potential slip zone is divided. Furthermore, both the stress equilibrium condition and the Mohr-Coulomb criterion were completely satisfied within the failure zone and on its boundaries. An effective iterative procedure was provided for determining the slip surface location, which converged rapidly, resulting in an approximately theoretical configuration of slip-line field and associated earth-pressure coefficient values if a sufficiently large number of triangular slices were employed.

Analytical calculation of the critical inclination of rock slopes with a planar failure surface under water pressure

Modified Limiting Equilibrium Method for Stability Analysis of Stratified Rock Slopes

An Approach for Determination of Lateral Limit Angle in Kinematic Planar Sliding Analysis for Rock Slopes

Stability Analysis of Rock Wedge Slide Subjected to Groundwater Dynamic Evolution

Analysis of Slope Failure Mechanism Caused by Uplift of Confined Water

Identification of arbitrarily shaped critical 3D failure surface of a slope based on the sliding direction

New Method for Computing Slip-Line Fields and Earth-Pressure Coefficients in Cohesionless Backfills

Development of a Probabilistic Kinematic Wedge Sliding Analysis Procedure and Application to a Rock Slope at a Hydropower Site in China

Development of a probabilistic block theory analysis procedure and its application to a rock slope at a hydropower station in China

An Analytical Model for Assessing Dynamic Stability of Bedding Rock Slope with Soil Interlayer Under Different Rain Patterns

ANALYSIS OF SHALLOW LANDSLIDE STABILITY UNDER INTENSIVE RAINFALL

ANALYSIS ON THE STABILITY OF ROCK SLOPE WITH SURFACE INFILTRATION

Influence of joint spacing and rock characteristics on the toppling stability of cut rock slope through a simplified limit equilibrium method

Failure mechanism and stability analysis of an open-pit slope under excavation unloading conditions

Three-dimensional upper-bound analysis of rock slopes subjected to seepage forces based on Hoek-Brown failure criterion

Experiments and analytical method for landslide scarp caused by water-induced weakening of basal sliding zone

An analytical solution to predict slip-buckling failure of bedding rock slopes under the influence of top loading and earthquakes: Case studies of Hejia landslide and Tangjiashan landslide

Rainfall threshold surface for slopes stability considering antecedent rainfall

Slope Stability Analysis with Nonlinear Failure Criterion

Stability analysis of slopes with stepped failure using a vector sum particle flow method

Identification of the Potential Critical Slip Surface for Fractured Rock Slope Using the Floyd Algorithm