Abstract:three phases are essential to the incremental-iterative analysis of elastically nonlinear structures, which generally followed in sequence: predictor, corrector and error-checking phases. The predictor phase included an assemblage of structural stiffness and the calculation of the incremental displacements, the corrector phase is to calculate the nodal forces, and the error-checking phase is to calculate the unbalanced forces and to update the configuration. In this paper, a modified solution strategy is presented for an elastically framed structure undergoing large displacements and large rotations. In predictor phase, by virtue of the rotational matrix for a rotational vector, three orthogonal vectors which rigidly attached a cross section were determined; using the central displacements and the vectors of cross-sectional principal axes, the displacements and strains for any point on a cross section were accurately determined. Applying the principle of virtual work, interpolating by the cubic Hermite spline, the tangent stiffness matrix was obtained. In the corrector phase, a corotational formulation is used for the recovery of the nodal forces with natural displacements, and it is derived in a corotational configuration which is rigidly moved by the last calculated the configuration in equilibrium. In each incremental load, the geometrical update of the elements are implemented before the incremental displacements are resolved, then the local element-end displacements corresponding to the corotational configuration were obtained; utilizing the stiffness matrix in a corotational configuration is employed to calculate the incremental element-end forces. Several classical numerical examples verified the accuracy and the efficiency of the present solution strategy.

The extended Monte Carlo techniques by rotating slip segments for searching general critical slip surface (II): Constant angle of rotation

Modified Monte Carlo Techniques by Rotating Slip Segments for Searching General Critical Slip Surface(ⅰ): Random Angle of Rotation

Extended Algorithm Using Monte Carlo Techniques for Searching General Critical Slip Surface in Slope Stability Analysis

Locating Sritical Slip Surfaces by a Method Combining Monte Carlo Technique and FEM

Modified Solution Strategy Of Framed Structures For Geometrically Nonlinear Analysis

Locating Global Critical Slip Surface Using the Morgenstern-Price Method and Optimization Technique

A Modified Newmark Method for Calculating Permanent Displacement of Seismic Slope Considering Dynamic Critical Acceleration

A new method for searching all possible circular slips of a slope

Determination of Slope Safety Factor with Analytical Solution and Searching Critical Slip Surface with Genetic-Traversal Random Method

Enhanced Moving Finite Element Method Based on Error Geometric Estimation for Simultaneous Trajectory Optimization

Extended DDA with Rotation Remedies and Cohesive Crack Model for Simulation of the Dynamic Seismic Landslide

An Approach for Determination of Lateral Limit Angle in Kinematic Planar Sliding Analysis for Rock Slopes

Composite Monte-Carlo Method on Structural Failure Hyperplane

An Efficient Approach for Locating the Critical Slip Surface in Slope Stability Analyses Using a Real-Coded Genetic Algorithm

Probabilistic seismic slope stability analysis using swarm response surfaces and rotational Newmark sliding model with primary sliding direction

LOCATING NON-CIRCULAR CRITICAL SLIP SURFACES BY PARTICLE SWARM OPTIMIZATION ALGORITHM

Generating Slip Surfaces Using the Logistic Function Integral

Critical slip surface and landslide volume of a soil slope under random earthquake ground motions

Mathematical functions for generating slip surfaces of slopes

SLOPE STABILITY ANALYSIS USING MONTE CARLO TECHNIQUE WITH FEM

A Fully Coupled Normal and Tangential Contact Model to Investigate the Effect of Surface Roughness on the Partial Slip of Dissimilar Elastic Materials