Abstract:Abstract When the fine-blanking process is used, secondary grinding or processing can be omitted because the shear surface of fine-blanking parts can achieve almost zero fracture zone requirements. The primary objective of the fine-blanking process is to reduce the fracture zone depth and die roll zone width. This study used a 2.5-mm-thick central processing unit (CPU) thermal heat spreader as an example. Finite element analysis software was employed to simulate and optimize the main eight process parameters that affect the fracture zone depth and die roll zone width after fine-blanking: the V-ring shape angle, V-ring height of the blank holder, V-ring height of the cavity, V-ring position, blank holder force, counter punch force, die clearance, and blanking velocity. Simulation analysis was conducted using the L 18 (2 1 × 3 7 ) Taguchi orthogonal array experimental combination. The simulation results of the fracture zone depth and die roll zone width were optimized and analyzed as quality objectives using Taguchi’s smaller-the-better design. The analysis results revealed that with fracture zone depth as the quality objective, 0.164 mm was the optimal value, and counter punch force made the largest contribution of 25.89%. In addition, with die roll zone width as the quality objective, the optimal value was 1.274 mm, and V-ring height of the cavity made the largest contribution of 29.45%. Subsequently, this study selected fracture zone depth and die roll zone width as multicriteria quality objectives and used the robust multicriteria optimal approach and Pareto-optimal solutions to perform multicriteria optimization analysis. The results met the industry’s fraction zone depth standard (below 12% of blank thickness) and achieved a smaller die roll zone width.

The study of blank optimization methods for stamping parts

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Parameters Optimization of Tailor Welded Blank Forming Process

Blank Design Based on the Inverse Finite Element Method

Research on applying one-step simulation to blank design in sheet metal forming

Optimum blank design in sheet metal forming by the deformation path iteration method

An Adaptive Design Method for Understanding Tolerance in the Precision Stamping Process

Some improvements on the one-step inverse isogeometric analysis by proposing a multi-step inverse isogeometric methodology in sheet metal stamping processes

Numerical Optimization of Variable Blank Holder Force Trajectories in Stamping Process for Multi-Defect Reduction

A 6-Sigma Robust Optimization Method for Stamping Forming of Automobile Covering Parts Based on Residual Error and Radial Basis Interpolation

Finite Element Simulation of Two Stroke Deep Drawing in Sheet Metal Forming

Structural design of stamping die of advanced high-strength steel part for automobile based on topology optimization with variable density method

Thermo-mechanical coupled simulation of hot stamping components for process design

Initial solution estimation of one-step inverse isogeometric analysis for sheet metal forming with complex topologies

Numerical simulation and optimization of fine-blanking process for copper alloy sheet

Thermo-mechanical simulation and parameters optimization for beam blank continuous casting

FEM Simulation on New Deep Drawing Process to Blank with Technique Holes

Optimizing Die Structure Using Finite Element Simulation

Design of Experiment Based Analysis for Sheet Metal Blanking Processes Optimisation

Static and Dynamic Deformation Analysis and Optimization of a Fine Blanking Press Frame

FEM model optimization study of mechanical properties and material selection in stamping process