Abstract:Currently eutrophication has become a hot issue all over the world.The removal of phosphorus from wastewaters is regarded as an important approach to fight eutrophication since phosphorus is one of the main factors causing eutrophication.The chemical phosphorus removal technology with ferric salt as a precipitant is in widespread use to meet the wastewater discharge standard.The optimization of phosphorus removal technology helps to cut down the cost of wastewater treatment.Herein the response surface methodology(RSM)is introduced to investigate the individual and combined effects of operation parameters.The performance of chemical phosphorus removal technology with ferric salt as a precipitant is dependant on a series of factors.Fe/P ratio,pH and flash mixing speed(FMS)were chosen as objects of study,and single-factor experiment and multiple-factor experiment were carried out to optimize the phosphorus removal efficiency.The results of single-factor experiment showed that both Fe/P ratio and pH had significant effects on phosphorus removal,but FMS did not.When the phosphorus concentration was 100mg/L,the optimal operation parameters were Fe/P ratio 3.0,pH 8.0,FMS 175-225r/min.The results of multiple-factor experiment showed that the individual effects of operation parameters on phosphorus removal were in order as Fe/PpH FMS.The combined effects of operation parameters were in order as Fe/P-FMS pH-FMS Fe/P-pH,among which the effects of Fe/P-FMS and Fe/P-pH were positive and the effect of pH-FMS was negative.Based on the experiment,priority/combinationmodel was proposed to enhance the phosphorus removal with ferric salt as a precipitant.The optimal operation parameters were as follows:Fe/P=2.57,pH=6.31and FMS=136r/min,when the phosphorus concentration was 100mg/L.Both synthetic and real wastewaters were used to verify the feasibility ofpriority/combinationmodel.Operated according to the model,the phosphorus removal was larger than 97%and the fractional error was less than 3%.It can be concluded that the response surface methodology is feasible for the optimization of operation parameters in wastewater treatment processes.Thepriority/combinationmodel is effective for the improvement of phosphorus removal from wastewaters with ferric salt as a precipitant.During the wastewater treatment,the synergic action of operation parameters should be fully used,while the antagonistic action of operation parameters should be carefully avoided.

POLLUTION REDUCTION METHODOLOGY FOR CHEMICAL REACTION PROCESS

A Pollution Reduction Methodology in Reactor Design

In Situ Generation of Hydrogen Peroxide Using Polymetallic-Doped G-C3n4 for Pollutant Removal

An Approach for Potential Environmental Impact Analysis in Reaction Processes

Industrial Chlorinated Organic Removal with Elimination of Secondary Pollution: A Perspective

Editorial: Secondary Pollution in the Environmental Pollution Control Process: Production, Environmental Risks and Reduction

Process Optimization for Phosphorus Removal with Ferric Salt by Response Surface Methodology

Multiple Objectives Application Approach to Waste Minimization

Investigation on the Synthesis of Ethyl Acetate in a Basic Chemistry Experiment

Controlling Environmental Pollution Relying on Advanced Technology

An Evaluation Method for Synergistic Effect of Air Pollutants and CO2 Emission Reduction in the Chinese Petroleum Refining Technology

Preliminary Ideas on Pharmaceutical Experimental Teaching with Envionmental Friendly Ways

Fundamental and Development of Microreaction Technology for the Application of Fine Chemicals Synthesis

Collaborative Optimization of Pollution and Carbon Reduction Through Carbon Flow Tracking Integrated with Life Cycle Assessment for Petrochemical Production

Red mud-based catalysts for the catalytic removal of typical air pollutants: A review

Reactor Network Synthesis for Waste Reduction Using Instantaneous Value of Environmental Index

Reaction path synthesis methodology for waste minimization

Process of redox reaction and contaminants control on microinterface at water/solid

A Comprehensive Framework for Targeting the Disturbance Propagation Path and Debottleneck Strategy of Chemical Process Considering the Topology and Cascading Effects

Electrochemcial Reduction of Diarylketones and Aryl Alkenes

Critical Review of Pd-Catalyzed Reduction Process for Treatment of Waterborne Pollutants