Abstract:One of the major applications (40% in Europe) of plastic is packaging, which is often printed to display required information and to deliver an attractive aesthetic for marketing purposes. However, printing ink can cause contamination in the mechanical recycling process. To mitigate this issue, the use of surfactants in an alkaline washing process, known as de-inking, has been employed to remove printing ink and improve the quality of recyclates. Despite the existence of this technology, there are currently no data linking the de-inking efficiency with typical printing ink compositions. Additionally, it is necessary to investigate the de-inking process under the process parameters of existing recycling plants, including temperature, NaOH concentration, and retention time. This study aims to evaluate the performance of commonly used printing inks with different compositions under various washing scenarios for plastic recycling in conjunction with different de-inking detergents containing surfactants or mixtures of surfactants. The results indicate that the pigments applied to the ink have no significant effect on the de-inking process, except for carbon black (PBk 7). Nitrocellulose (NC) binder systems exhibit high de-inkability (over 95%) under the condition of 55 °C and 1 wt.% NaOH. However, crosslinked binder systems can impede the de-inking effect, whether used as a binder system or as an overprint varnish (OPV). The de-inking process requires heating to 55 °C with 1 wt.% NaOH to achieve a substantial effect. Based on the findings in this work, breaking the Van der Waals forces, hydrogen bonds, and covalent bonds between the printing ink and plastic film is an essential step to achieve the de-inking effect. Further research is needed to understand the interaction between surfactants and printing inks, enabling the development of de-inkable printing inks and high-performance surfactants that allow for de-inking with less energy consumption. The surfactant and NaOH have a synergistic effect in cleaning the printing ink. NaOH provides a negative surface charge for the adsorption of the cationic head of the surfactant and can hydrolyze the covalent bonds at higher concentrations (>2 wt.%).

Effect of Inorganic Salt Compounds on Deinking Efficiency of ONP

Effect of Adding Inorganic Salt Compounds on Colloid Chemistry Characteristic and Deinking Efficiency of MOW

Analysis Of Electrochemical Character Affecting Deinking Efficiency Of Onp

Effect of Fixing Agent Dosage on the Mechanism of Colloidal Substances Retention Onto Pulp

The Effect of Sodium Silicate's Modulus on ONP Deinking

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Screening the Impact of Surfactants and Reaction Conditions on the De-Inkability of Different Printing Ink Systems for Plastic Packaging

Study on the coagulation treatment of activated dye wastewater

Effects of Deinking Mode on Pore Structure and Crystallization Property of Recycled Fiber

Influence on Organics Removal Effect of Ultrafiltration by Various Pretreatment Process

Effect of Acetate and Inorganic Salts on the Performance of a Partial Nitritation Reactor

Integrated Process Combined with Fenton Reaction for the Treatment of Papermaking Deinking Wastewater

Enzymatic Deinking of Old Newspaper

Effects of Magnesium-Based Alkali on the Dissolved and Colloidal Substances in the Alkaline Peroxide Bleaching of Poplar Ctmp

Effect of DCS in Recycled White Water on Deinking and Bleaching of Old Newspaper

Flotation de-inking for recycling paper: contrasting the effects of three mineral oil-free offset printing inks on its efficiency

Membrane fouling in a hybrid process of enhanced coagulation at high coagulant dosage and cross-flow ultrafiltration for deinking wastewater tertiary treatment

Effect of cations on the removal rate of chloride ions and mechanism analysis in high-salt wastewater

Preparation of inorganic-organic composite coagulants PAFC-PDA and its effects on treating synthetic printing and dyeing wastewater

Dyeing and Finishing Effluent Treatment with Chitosan/Inorganic Composites

N, S Co-Doped Carbons Derived from Enteromorpha prolifera by a Molten Salt Approach: Antibiotics Removal Performance and Techno-Economic Analysis