Effect of Acetate and Inorganic Salts on the Performance of a Partial Nitritation Reactor

金仁村,阳广凤,马春,郑平

DOI: https://doi.org/10.13671/j.hjkxxb.2010.03.008

2010-01-01

Abstract:The process conditions for partial nitritation and the feasibility of a partial nitritation reactor for treatment of effluents containing residual carbonaceous compounds and in some cases high salt concentrations were evaluated with batch tests and a continuous-flow experiment. The results showed that stable partial nitritation could be achieved by control of influent basicity, dissolved oxygen and hydraulic retention time. When acetate was used,concentrations up to 800 mg·L~(-1) did not exert significant effect on the ammonia oxidation to nitrite. But values higher than 500 mg·L~(-1) resulted in a high denitrification rate, with a detrimental effect on the quality of the effluent from the partial nitritation reactor that should be further treated in an anammox process. When NaCl, KCl and Na_2 SO_4 were tested in batch experiments, similar inhibitory effects were encountered. Molar concentrations of 150 mmol· L~(-1) caused 40% inhibition of the maximum specific ammonia oxidizing activity. The effect of NaCl on the operation of the partial nitritation reactor was tested at concentrations between 0 and 30 g·L~(-1). The ammonia oxidation activity remained stable in the presence of 25 g·L~(-1), while higher salt concentrations up to 27 g·L~(-1) provoked a great decrease in the activity. Nitrite oxidizers were less affected by salt stress as compared to ammonia oxidizers.