Abstract:Anaerobic ammonium oxidation (Anammox) was a recent discovery of new energy-efficient, microbiologically mediated nitrogen removal process, which was mainly used for the treatment of rich ammonium wastewater of low C/N ratio in a high operating temperature of 35–40 °C. But the growth rate of anammox bacteria was extremely low and it was easily inhibited by many factors, which becomes a bottleneck problem in the application of this efficient nitrogen removal process in the actual wastewater treatment at ambient temperature. So, influence of several key factors (i.e., COD, methanol, hydrazine, hydroxylamine, pH, nitrate, and phosphate) on the nitrogen removal performance of the anammox process was researched to optimize the operation of the anammox process in a bio-filter, and the total nitrogen removal rate (RTN) and the linear correlation coefficient between the total nitrogen removal rate (RTN) and influent total nitrogen load (LTN) of it were assessed with the real municipal wastewater at ambient temperature. The results demonstrated that (1) the influent of COD <100 mg/L had no visible inhibition on the anammox process in the bio-filter, and the recommendation of COD <80 mg/L was suitable for the operation; (2) short-term shock load of methanol would give significant inhibition on the anammox bacteria, which could be restored by adding a small amount of hydrazine and hydroxylamine, but the recovery process was extremely slow; (3) when the influent total nitrogen load increased suddenly, and the removal capacity of the bio-filter was not enough, the temporary mixed dosing of hydroxylamine and hydrazine could enhance the nitrogen removal performance; (4) the anammox activity was very sensitive to the influent pH, and the best range of pH values was 7.3–7.6; (5) the nitrate of 23.56–463.14 mg N/L had no obvious effect on the nitrogen removal performance; and (6) the phosphate itself had no significant inhibition on the anammox bacteria physiologically and ecologically, but it could form a great deal of deposits, which would lead to the bio-filter plugging.

Effect of Low Ph on the Performance of High-loaded ANAMMOX Reactor

Long-term Effect of Ph on Denitrification: High Ph Benefits Achieving Partial-Denitrification.

Performance of ANAMMOX process with different operation strategies based on substrate concentration

Effect of Organic Matter on Performance of ANAMMOX Reactor

The Effect of Hydraulic Retention Time on Ammonia and Nitrate Bio-Removal over Nitrite Process

Nitrogen Removal Performance of Anammox Process and Toxic Mechanism of Pharmaceutical Wastewater

Deep Purification of Low-Strength Ammonium-Containing Wastewater with ANRE Process

Low-strength influence on nitrogen removal performance and bacterial community structure of the anammox process

Effect of Ph Shock on Performance of Reactor for Simultaneous Anaerobic Sulfide and Nitrate Removal

Stability and Mechanism of Anammox Bioreactors

Performance of ANAMMOX-EGSB Reactor

Monosodium glutamate wastewater treatment with a full-scale SHARON reactor

Suppression of Anaerobic Ammonium Oxidizers under High Organic Content in High-Rate Anammox UASB Reactor

Effect of Salinity on the Performance of an Anammox Reactor

Effect of Substrate Concentration on Stability of Anammox Biofilm Reactors

[Performance and Process Kinetics of Pilot-Scale ANAMMOX Bioreactor under Different Water Temperatures].

Effect of pH on nitrification

Partial-nitritation of low-strength anaerobic effluent: A moderate-high dissolved oxygen concentration facilitates ammonia-oxidizing bacteria disinhibition and nitrite-oxidizing bacteria suppression

Several key factors influencing nitrogen removal performance of anammox process in a bio-filter at ambient temperature

Research Progress on Treatment of Low Ammonia Nitrogen Wastewater by Anaerobic Ammonia Oxidation Process

Operation stability and recovery performance in an Anammox EGSB reactor after pH shock