Abstract:A simple ultrasonic method was developed to synthesize rod-like SnS nanocrystals, using tin chloride and thioacetamide as starting materials, ethanolamine and water as solvents. The as-obtained nanostructures were characterized by X-ray diffraction (XRD) study, energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Ultraviolet-visible spectrophotometry (UV). From the XRD pattern, the reflection peaks of the as-obtained samples can be indexed to the orthorhombic structure with lattice constants a = 3.99, b = 4.34, c = 11.20 angstrom, which are very consistent with the values in the standard card of SnS phase (JCPDS No. 39-0354). No characteristic peak was observed for other impurities such as SnO2 and SnS2, implying the formation of single-phase tin monosulfide. The quantification calculation shows the ratio of Sn/S to be 51.30/48.70 via the EDS analysis. These data clearly indicate that the as-prepared rod-like nanostructures are exactly SnS. TEM results show that, the SnS nanorods have length about 100nm and width less than 30nm. The direct and indirect band gaps of the SnS nanorods are determined to be 1.53 eV and 1.34 eV, respectively. The band gaps of the as-obtained SnS nanorods showed blue shifts due to the quantum size effects. The ultrasonic condition is believed to be critical for the formation of SnS with pure phase. For it provides the energy to form rod-like nanostructures and helps preventing the hydrolysis of Sn2+ to form tin oxides and hydrates. Also, it prevents oxidation of the final products.

Microwave-assisted Polyol Synthesis of Nanoscale SnSx (x = 1, 2) Flakes

Two-dimensional SnS nanosheets fabricated by a novel hydrothermal method

Novel polyol route to nanoscale tin sulfides flaky crystallines

Synthesis of SnS2 nanocrystals via a solvothermal process

Hydrothermal synthesis, characterization and properties of SnS nanoflowers

Microwave Synthesis Of Nanocrystalline Metal Sulfides In Formaldehyde Solution

Synthesis, Characterization, and Properties of Nanocrystalline Cu2sns3

Synthesis and Characterization of SnS Nanoflakes

Hydrothermal synthesis and characterization of novel aloe-like SnS 2 nanostructures

Ultrasonically Assisted Synthesis of Tin Sulfide Nanorods at Room Temperature

Synthesis of lead sulfide nanocrystals via microwave and sonochemical methods

Hydrothermal Synthesis and Fast Photoresponsive Characterization of SnS2 Hexagonal Nanoflakes

Novel Microwave Synthesis of Nanocrystalline SnO2 and Its Electrochemical Properties

Tin(IV) Sulfide: Novel Nanocrystalline Morphologies

Controllable Synthesis and Photoelectric Property of Hexagonal SnS2 Nanoflakes by Triton X-100 Assisted Hydrothermal Method

Hydrothermal Synthesis and Photocatalysis of SnS2 Nanomaterials

Green Synthesis by Diethylene Glycol Based Solution Process and Characterization of SnS Nanoparticles

The Synthesis of SnS2 Nanoflakes from Tetrabutyltin Precursor

Novel Synthesis of Well-Dispersed Crystalline SnO2 Nanoparticles by Water-in-oil Microemulsion-Assisted Hydrothermal Process.

Hydrothermal Synthesis and Characterization of Sns2 Nanocrystals

Polyvinylpyrrolidone-assisted ultrasonic synthesis of SnO nanosheets and their use as conformal templates for tin dioxide nanostructures.