Abstract:<p>Helium bubble formation was examined by scanning/transmission electron microscopy (S/TEM) in Fe-9/10Cr binary alloys and two dispersion strengthened nanostructured alloys (CNA3 and 14YWT containing 5-10 nm diameter carbide and oxide particles, respectively) after ex-situ and in-situ He implantation to ∼10,000 appm at 500 to 900°C. The combination of high-resolution STEM images and electron energy loss spectroscopy (EELS) revealed that the Y-Ti-O nanoparticles in 14YWT were uniformly distributed and exhibited a one-to-one relationship for bubble attachment to the nanoclusters. In the in-situ experiment at 900°C, grain boundary cracking was severe in the Fe-10Cr model alloy, but not in the nanostructured alloys. From 500-900°C, the bubble size generally increased with increasing irradiation temperature, while the bubble density decreased with increasing temperature. At the same temperatures, the bubble size in the implanted materials was in the order of Fe-9/10Cr > CNA3 > 14YWT, while the bubble density showed the opposite order. The observed bubble number densities for the nanostructured alloys are comparable to the nanoparticle density, suggesting that the nanoparticles in both alloys were effective in trapping He. Our results indicate that very high He concentrations can be managed in nanostructured alloys by sequestering the helium into smaller bubbles (which leads to a lower volume swelling value) and to shield He from the grain boundaries. This can be attributed to the much higher sink strength associated with the nanoclusters or the He trapping ability between different types of nanoclusters.</p>

Preservation Dose of Helium-Implanted in Nanocrystal Titanium Films

Study of the Preservation of Helium Implanted in Nanocrystal Titanium Film by Enhanced Proton Backscattering Spectrometry

Progress of Helium Evolution in Aging Titanium Tritide Film

PBS and XRD Study on Helium-Charged Nanocrystalline Titanium Film

Effects of Substrate Temperature on Helium Content and Microstructure of Nanocrystalline Titanium Films

Evolution of Helium-Related Defects in Helium-Containing Nanocrystalline Titanium Films After High Temperature Annealing

Preparation of Helium-Charged Nanocrystalline Titanium Films Deposited by Magnetron Sputtering

Effects of helium on titanium films and the helium diffusion

Helium-Related Defect Evolution in Titanium Films by Slow Positron Beam Analysis

In-Situ Helium Implantation and TEM Investigation of Radiation Tolerance to Helium Bubble Damage in Equiaxed Nanocrystalline Tungsten and Ultrafine Tungsten-TiC Alloy

Structural evolution of amorphous and nanocrystalline TiAl films under helium implantation

Effect of Helium Implantation on the Hydrogen Retention of Cr2O3 Films Formed in an Ultra-Low Oxygen Environment

Helium—Charged Titanium Films Deposited by Pulsed Laser Deposition in an Electron—Cyclotron—Resonance Helium Plasma Environment

Study of Helium Evolution in Nanocrystalline Titanium Films by Slow Positron Beam Analysis

Study of the Defect Formation of Helium in Nanocrystalline Titanium Films

Prior implantation of hydrogen as a mechanism to delay helium bubbles, blistering, and exfoliation in titanium

Structure and micro-mechanical properties of helium-implanted layer on Ti by plasma-based ion implantation

A STUDY OF THERMAL-DESORPTION OF HELIUM FROM HIGH-PURE ALPHA-TI AND HYDROGENATED TI SAMPLES

Bubble formation in helium-implanted nanostructured ferritic alloys at elevated temperatures

Simulation of Helium Behaviour in Titanium Crystals Using Molecular Dynamics

Evolution of 3He bubble microstructure in TiT2 films during aging