Abstract:Spatially resolved spectroscopy provides a means for measuring the optical properties of biological tissues, based on analytical solutions to diffusion approximation for semi-infinite media under the normal illumination of an infinitely small light beam. The method is, however, prone to error in measurement because the actual boundary condition and light beam often deviate from that used in deriving the analytical solutions. It is therefore important to quantify the effect of different boundary conditions and light beams on spatially resolved diffuse reflectance in order to improve the measurement accuracy of the technique. This research was aimed at using finite element method (FEM) to model light propagation in turbid media, subjected to normal illumination by a continuous-wave beam of infinitely small or finite size. Three types of boundary conditions [i.e., partial current (PCBC), extrapolated (EBC), and zero (ZBC)] were evaluated and compared against Monte Carlo (MC) simulations, since MC could provide accurate fluence rate and diffuse reflectance. The effect of beam size was also investigated. Overall results showed that FEM provided results as accurate as those of the analytical method when an appropriate boundary condition was applied. ZBC did not give satisfactory results in most cases. FEM-PCBC yielded a better fluence rate at the boundary than did FEM-EBC, while they were almost identical in predicting diffuse reflectance. Results further showed that FEM coupled with EBC effectively simulated spatially resolved diffuse reflectance under the illumination of a finite size beam. A large beam introduced more error, especially within the region of illumination. Research also confirmed an earlier finding that a light beam of less than 1 mm diameter should be used for estimation of optical parameters. FEM is effective for modeling light propagation in biological tissues and can be used for improving the optical property measurement by the spatially resolved technique. (C) 2015 Optical Society of America

Analysis of a cylindrical microlens array with long focal depth by a rigorous boundary-element method and scalar approximations.

Subwavelength Focusing by a Microsphere Array

Step heat-forming photoresist method for expanding the N. A. range of refractive microlens

Subwavelength Focusing by a Micro/nanofiber Array.

Analysis of Diffractive Microlenses Focal Performance Based on Rigorous Electromagnetic Theory

Design of a Panoramic Annular Lens with a Long Focal Length.

Finite element modeling of light propagation in turbid media under illumination of a continuous-wave beam

Rigorous vector analysis of diffractive micro-cylindrical lenses' characteristics of focal depth and focal shift

Axial Focusing Characteristics Of Diffractive Micro-Lenses Based On A Rigorous Electromagnetic Theory

Analysis of Diffractive Micro-cylindrical Lenses Based on Rigorous Electromag-netic Model

Spherical Aberration Compensation Method for Long Focal-Length Measurement Based on Talbot Interferometry

High-performance compact athermal panoramic annular lens design with separated radial optical power

Rigorous Concept For The Analysis Of Diffractive Lenses With Different Axial Resolution And High Lateral Resolution

Chromatically Multi-Focal Optics Based on Micro-Lens Array Design.

Study on the diffraction light field of two special beams through a cylindrical lens

Rigorous Transmittance Analysis of a Sub-Wavelength Sb Thin Film Lens

Research on the Design of Kepler Refractive Shaping System with the Long Working Focal Depth

Tight Focusing Properties and Focal Field Tailoring of Cylindrical Vector Beams Generated from a Linearly Polarized Coherent Beam Array.

Geometrical characterization of micro-optical cylindrical lens arrays using angular resolved diffraction

Rigorous Vector Analysis of Finite Aperture Subwavelength Diffractive Optical Elements

Design and Parametric Analysis of the Broadband Achromatic Flat Lens