Abstract:Electronic devices are progressively fabricated on flexible substrates allowing new fields of applications. A maskless and very flexible structuring process is offered by ablation using ultra-short pulse laser irradiation. Usually, certain areas of a functional thin film coating are locally removed to yield the needed device structures. Micro laser patterning quality is not only influenced by the beam properties (beam profile, fluence) but also by pulse overlap, scan repetitions and many other factors such as substrate and coating material. This makes process parameter optimization a challenging task. In this paper, we present a systematic approach to efficiently find suitable parameters for laser-induced ablation of thin films on susceptible polymer substrates. As an example, we use a sputtered NiCr coating with a thickness of 100 $nm$ on a polyimide film made by spin coating of PI-2611 precursor (@ 2000 $rpm$ > ca. 8 ${\mu}m$, HD microsystems). Irradiation is conducted using a fs-laser with infrared wavelength of 1030 $nm$ and a pulse length of 212 $fs$. The energy per pulse is varied in the range of 0,29 ${\mu}J$ to 4,83 ${\mu}J$, yielding fluence values between 70 $mJ/cm^2$ and 1,11 $J/cm^2$. Ablation threshold fluence for a 100 $nm$ layer of NiCr was found to be ${\phi}_{th}$ ($N_P$:1)=0,50 $J/cm^2$ and the incubation factor was evaluated to be ${\xi}$=0,53. A clear distinction must be made between the material ablation at the surface of a bulk material and the selective removal of a thin film. In the second case effects such as flaking occur in practice and influence the ablation characteristic. We then investigate different varieties of thin film removal including dot-, line- and areal-ablation. The methodology is presented using a practical example, but can be applied to selective ablation of a wide range of thin film systems.

Near-Infrared Laser Ablation Of Poly Tetrafluoroethylene (Teflon) Sensitized By Nanoenergetic Materials

Ablation Efficiency of a Novel Thulium Fiber Laser: an in Vitro Study on Laser Setting and Fiber Usage.

Partial ablation of Ti/Al nano-layer thin film by single femtosecond laser pulse

Femtosecond Laser Ablation of Ti Alloy and Al Alloy

Femtosecond Laser on the Surface of PTFE

A Low Diffraction Laser Beam As Applied to Polymer Ablation

Initial response and combustion behavior of microscale Al/PTFE energetic material by nanosecond laser ignition

Study on Ablation Characteristics of Femyosecond Laser Nanoscale Processing for Aluminum Nitride and LeadZirconate Titanate Ceramics

Preparation of Polytetrafluoroethylene Superhydrophobic Materials by Femtosecond Laser Processing Technology

Effect of Geometry Measurements on Characteristics of Femtosecond Laser Ablation of HR4 Nickel Alloy

Polymer surface reactivity enhancement by ultraviolet ArF laser irradiation: An x‐ray photoelectron spectroscopy study of polytetrafluoroethylene and polyethyleneterepthalate ultraviolet treated surfaces

Methodology of selective metallic thin film ablation from susceptible polymer substrate using pulsed femtosecond laser

Thermal Stability of Micro–nano Structures and Superhydrophobicity of Polytetrafluoroethylene Films Formed by Hot Embossing Via a Picosecond Laser Ablated Template

Nanostructures on Fluoropolymer Nanotextile Prepared Using a High-Energy Excimer Laser

Femtosecond laser texturing assisted cold plasma hydrophilization of polytetrafluoroethylene surface

Controlled photothermal ablative processing of commercial polymers minimizing undesired thermal effects under high frequency femtosecond laser irradiation

Physics of picosecond pulse laser ablation

Femtosecond laser-mediated preparation of HfNbTaTiZr refractory high-entropy alloy nanoparticles for photothermal therapy applications: Influence of solvent and fluence

Dynamic simulation and model of laser ablation of Al/PTFE material in the vacuum

In vitro investigation of stone ablation efficiency, char formation, spark generation, and damage mechanism produced by thulium fiber laser

Al2O3 Encapsulated Teflon Nanostructures with High Thermal Stability and Efficient Antireflective Performance