Abstract:Using granulated blast furnace slag (GGBS) as the volcanic ash material and fly ash (FA) as the supplementary material, the study was conducted to investigate the mix proportions of an alkali-activated solid waste cementitious material under the stimulating effect of alkali activator carbide slag (CS). This type of cementitious material could serve as a substitute for a portion of cement usage, contributing to resource conservation and mitigating environmental pollution caused by solid waste. This facilitates green and sustainable development. Firstly, an analysis of three raw materials was conducted, and the mix proportions were designed with reference to the CaO-Al 2 O 3 -SiO 2 system of Portland cement. Then 28 groups of specimens were prepared based on the designed mix proportions. The flowability and setting time of each group of specimens were tested. It was observed that an increase in the amount of CS and a decrease in the amount of GGBS resulted in decreased flowability and earlier setting times of the specimens. Additionally, FA exhibited a retarding effect on setting time. Compressive strength tests were conducted on these specimens, revealing that the optimal CS content ranged between 20 % and 40 %. Overall, FA had minimal impact on compressive strength, but it contributed to increased compressive strength in the specimens at later ages. Subsequently, microscopic characterization of the hydration products was performed using X-ray Diffraction (XRD), Fourier Transform Infrared (FTIR), Differential Thermal Analysis (DTA), Scanning Electron Microscope (SEM), and Energy Dispersive Spectrometer (EDS). The hydration products were identified as predominantly composed of calcium silicate hydrate. The quality and defects in the microstructure of gel products from various specimen formulations were compared to elucidate differences in macroscopic performance. Finally, the hydration process mechanism diagram of alkali-activated materials was presented to illustrate the stimulation and formation of gel products, primarily composed of C-S-H. This diagram revealed the principles behind the action of alkali-activated cementitious materials. The proposed design and testing methodology for the GGBS-FA-CS system in this study had certain reference significance for research in the direction of alkali-activated solid waste cementitious materials.

The progress on bulk material utilization of industrial solid waste

Utilization of Cow Bone Waste and Calcium Oxide for the Solidification and Stabilization of MSWI Fly Ash: Towards Sustainable Practices

A New Process for Highly Effective Utilization of Industrial Solid Wastes — Sialite Technology

Progress of utilization of fly ash with high concentration alumina

DEVELOPMENT ON APPLICATIONS OF SILICATE SOLID WASTES (COAL GANGUE)

Present Situation of Comprehensive Utilization Technology of Industrial Solid Waste

Integrated Utilization Of Sewage Sludge And Coal Gangue For Cement Clinker Products: Promoting Tricalcium Silicate Formation And Trace Elements Immobilization

Study on the Alkali–Sulfur Co-Activation and Mechanical Properties of Low-Carbon Cementitious Composite Materials Based on Electrolytic Manganese Residue, Carbide Slag, and Granulated Blast-Furnace Slag

A New Process on Efficient Utilization of Melted Slag

Preparation of high-strength ceramsite from coal gangue and printing and dyeing sludge: Design strategy and modelling mechanism

Properties of Glass-Ceramics Prepared from Industrial Multi-Wastes

Recent Progress on the Synthesis and Applications of Zeolites from Industrial Solid Wastes

Study on the preparation, performance, and mechanism for solid waste cementitious materials

Recent Advances in the Synthesis of Zeolites from Solid Wastes

Preparation and 3D printing building application of sulfoaluminate cementitious material using industrial solid waste

A Preliminary Study on Zero Solid Waste Generation from Pulverised Coal Combustion (Pcc)

The Mechanical Properties and Mechanisms in Contact-Hardening Behavior of Silica-Alumina Mine Solid Waste

Preparation and Properties of a Sulphoaluminate Magnesium-Potassium Phosphate Green Cementitious Composite Material from Industrial Solid Wastes

Research Progress of Low-Carbon Cementitious Materials Based on Synergistic Industrial Wastes

A review of the synthesis and application of zeolites from coal-based solid wastes

Mechanical activation of siliceous tailings and its application as cement admixtures