Abstract:More than 20 million tons of ladle furnace slag are produced annually. This slag is mainly treated by stockpiling; however, stacking results in dust and heavy metal pollution. Utilizing this slag as a resource can reduce primary resource consumption and eliminate pollution. In this review, existing studies and practices related to slag are discussed, and applications for different slag types are analyzed. The findings reveal that under alkali- or gypsum-activated conditions, CaO–SiO 2 –MgO, CaO–Al 2 O 3 –MgO, and CaO–SiO 2 –Al 2 O 3 –MgO slags may act as a low-strength binder, a garnet- or ettringite-based binder, and a high-strength cementitious material, respectively. Partial replacement of cement with CaO–Al 2 O 3 –MgO or CaO–SiO 2 –Al 2 O 3 –MgO slag can adjust the settling time. Meanwhile, CaO–SiO 2 –Al 2 O 3 –FeO–MgO slag combined with fly ash can be used to prepare a high-strength geopolymer, and CaO–Al 2 O 3 –MgO and CaO–SiO 2 –MgO slags may yield high carbon dioxide sequestration percentages. However, the aforementioned applications could lead to secondary pollution because these slags contain heavy metals and sulfur. Removing them or suppressing their dissolution is therefore of significant interest. Reusing hot slag in a ladle furnace could be an efficient utilization strategy because it can recover heat energy while utilizing the components of the hot slag. However, adopting this approach necessitates the further development of an efficient method for removing sulfur from hot slag. Overall, this review elucidates the relationship between the utilization method and slag type and identifies future research directions, thereby providing references and guidance for future research on slag utilization.

A New Process on Efficient Utilization of Melted Slag

A New Method for Effective Utilization of Melted Solid Waste

Utilization of Steel Slags in the Cement Industry

Process to utilize crushed steel slag in cement industry directly: Multi-phased clinker sintering technology

A novel synergistic method on potential green and high value-added utilization of blast furnace slag

An efficient molten steel slag gas quenching process: Integrating carbon solidification and waste heat recovery

Resource utilization of slag from desulphurization and slag skimming: A comprehensive recycling process of all components

PROCESS PRACTICE OF SMELTING WITH FERROUS COMPOUNDS AND STEEL SLAG

Three-Stage Method Energy–Mass Coupling High-Efficiency Utilization Process of High-Temperature Molten Steel Slag

Sustainable Utilization of Steel Slag from Traditional Industry and Agriculture to Catalysis

Comprehensive Utilization and Control Measures of Iron and Steel Slag

A Review of Granulation Process for Blast Furnace Slag

Generation, utilization, and environmental impact of ladle furnace slag: A minor review

Research status of centrifugal granulation, physical heat recovery and resource utilization of blast furnace slags

Heat Recovery from High Temperature Slags: A Review of Chemical Methods

Enhancing performance and durability of slag made from incinerator bottom ash and fly ash

Industrialization Mode for Energy Recovery Using Dry Centrifugal Granulation Process

Comprehensive utilization of steel slag: A review

Energy conservation and emission reduction through utilization of latent heat of copper slag for iron and copper recovery

Recycling of steel slag as an alkali activator for blast furnace slag: geopolymer preparation and its application in composite cement

A novel approach for the resource utilization of zinc-bearing dust and sludge via the blast furnace main trough