Abstract:The aim of this study is to provide technological parameters for the pilot scale study,for which we have investigated the effect of the formulas on the major properties(specific surface area,compressive strength,water absorption and density)of the ceramisite sintered from the sewage sludge,sediment and fly ash so as to optimize the proportion of the raw materials for making ceramisite filter and lightweight aggregate.To proceed with our research,we have first of all examined the effect of the preheating temperature and the water ingredient of the raw materials.At the same time,orthogonal design has been set up to discuss the sintering effect of the main process conditions.The experimental results of our research indicate that no remarkable regularity can be found between the raw material formula and the major properties of the ceramisite.Therefore,the formula for producing different kinds of ceramisite can be deduced and confirmed by the field experiments according to the components of the raw materials and the field experimental conditions.Sufficient preheating process is expected to enhance the compressive strength of the ceramisite,while insufficient one is likely to be beneficial for improving the pose structure and reducing the density of the ceramisite.Increasing water content in the raw materials is likely to lead to the ceramisite's loose structure,low compressive strength and high water absorption rate.However,the sintering temperature is the most important influential factor for producing both the filter and the aggregate.Adding sewage sludge in a certain range proves beneficial for expanding the specific surface area for sintering ceramisite filter.But the dosage of sewage sludge should be restrained within 40%-45% or the compressive strength would drop dramatically.The content of sludge should be limited within 30%-35% for the making of lightweight aggregate in order to maintain the compressive strength at a higher level

Preparation of high-strength ceramsite from coal gangue and printing and dyeing sludge: Design strategy and modelling mechanism

Preparation of Lightweight Ceramsite from Solid Waste Using SiC as a Foaming Agent

Preparation of ultra-lightweight ceramsite from waste materials: Using phosphate tailings as pore-forming agent

Exploring mechanical properties and long-term environmental impact of ceramsites derived from diverse solid wastes

Process and property optimization of ceramsite preparation by Bayan Obo tailings and blast furnace slag

Preparation of ceramsite from lead-zinc tailings and coal gangue: Physical properties and solidification of heavy metals

Preparation of ceramsite using solid residue from anaerobic digestion of waste activated sludge and its enhancing effect on catalytic ozonation

Preparation of High-strength ceramsite from municipal solid waste incineration fly ash and clay based on CaO-SiO2-Al2O3 system

Preparation of ultra-lightweight ceramsite from red mud and immobilization of hazardous elements

Environmental Toxicity Analysis and Reduction of Ceramsite Synthesis from Industrial Coal Gasification Coarse Cinder Waste

Preparation and Properties of Porous Ceramsite from Waste Foundry Sand and Ash

The Technical Study on the Preparation of Lightweight Ceramsite Made from Sewage Sludge and Fly Ash

Co-utilization of iron ore tailings and coal fly ash for porous ceramsite preparation: Optimization, mechanism, and assessment

Green synthesis of ceramsite from industrial wastes and its application in selective adsorption: Performance and mechanism

A Novel Method for Preparing Lightweight and High-Strength Ceramisite Coarse Aggregates from Solid Waste Materials

Technological Study on Sintering Ceramisite with Sewage Sludge and Sediment and Fly Ash

Preparing high-strength ceramsite from ferronickel slag and municipal solid waste incineration fly ash

Preparation and Characterization of the Ceramsites with Microscale Pores from Iron Tailing and Fly Ash

Optimization of coal-based solid waste ceramsite foam concrete mix proportions and performance study

Preparation and 3D printing building application of sulfoaluminate cementitious material using industrial solid waste

Mechanical properties and solidification mechanism of coal gangue-granulated blast furnace slag geopolymer stabilized engineering slurry