Abstract:Acoustic Emission (AE) is revealed to be highly adapted to monitor materials and structures in materials research and for site monitoring. AE-features can be either analyzed by means of physical considerations (geophysics/seismology) or through their time/frequency waveform characteristics. However, the multitude of definitions related to the different parameters as well as the processing methods makes it necessary to develop a comparative analysis in the case of a heterogeneous material such as civil engineering concrete. This paper aimed to study the micro-cracking behavior of steel fiber-reinforced reinforced concrete T-beams subjected to mechanical tests. For this purpose, four-points bending tests, carried out at different displacement velocities, were performed in the presence of an acoustic emission sensors network. Besides, a comparison between the sensitivity to damage of three definitions corresponding to the b-value parameter was performed and completed by the evolution of the RA-value and average frequency (AF) as a function of loading time. This work also discussed the use of the support-vector machine (SVM) approach to define different damage zones in the load-displacement curve. This work shows the limits of this approach and proposes the use of an unsupervised learning approach to cluster AE data according to physical and time/frequency parameters. The paper ends with a conclusion on the advantages and limitations of the different methods and parameters used in connection with the micro/macro tensile and shear mechanisms involved in concrete cracking for the purpose of in situ monitoring of concrete structures.

Self-diagnosis Mechanism of Carbon Fiber Reinforced Cementitious Materials Studied by Acoustic Emission Technique

Damage in carbon fiber-reinforced concrete, monitored by both electrical resistance measurement and acoustic emission analysis

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Cracking Mechanism of Corroded Reinforced Concrete Column Based on Acoustic Emission Technique

Acoustic Emission Study on the Damage Evolution of a Corroded Reinforced Concrete Column under Axial Loads

Damage Analysis of Carbon Nanofiber Modified Flax Fiber Composite by Acoustic Emission

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Monitoring and evaluation of concrete damage based on acoustic emission technique

Acoustic Emission Analysis of Corroded Reinforced Concrete Columns under Compressive Loading.

Damage Monitoring of Regularly Arrayed Short-Fiber-Reinforced Composite Laminates under Tensile Load Based on Acoustic Emission Technology

Crack detection and damage evaluation of asymmetrical steel-reinforced concrete frame nodes using acoustic emission technology

Damage Evaluation of Fiber Reinforced Plastic-Confined Circular Concrete-Filled Steel Tubular Columns under Cyclic Loading Using the Acoustic Emission Technique

Acoustic Emission Monitoring of Progressive Damage of Reinforced Concrete T-Beams under Four-Point Bending

STUDY ON MICROSTRUCTURE FRACTURE OF CEMENT-BASED COMPOSITES BY ACOUSTIC EMISSION TECHNIQUE

Study of the Healing Effect of Concrete with Supplementary Cementitious Materials after Early-Age Damage by Acoustic Emission Technique

Experimental Investigation of Compressive Damage Mechanisms on 3-D Braided Composites by Acoustic Emission

Studying the dynamic damage failure of concrete based on acoustic emission

Investigation of Compressive Damage Mechanisms in 3d Braided Composites by the Acoustic Emission Events Energy and Amplitude

Electrical responses of carbon fiber reinforced cementitious composites to monotonic and cyclic loading