Abstract:<section class="article-section__content"><h3 class="article-section__sub-title section1"> Purpose</h3><p>To evaluate two distortion correction techniques for diffusion‐weighted single‐shot echo‐planar imaging (DW‐ssEPI) on a 0.35T MR‐guided radiotherapy (MRgRT) system.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Methods</h3><p>The effects of sequence optimization through enabling parallel imaging (PI) and selecting appropriate bandwidth on spatial distortion were first evaluated on the 0.35T MRgRT system using a spatial integrity phantom. Field map (FM) and reversed gradient (RG) corrections were then performed on the optimized protocol to further reduce distortion. An open‐source toolbox was used to quantify the spatial displacement before and after distortion correction. To evaluate ADC accuracy and repeatability of the optimized protocol, as well as impacts of distortion correction on ADC values, the optimized protocol was scanned twice on a diffusion phantom. The calculated ADC values were compared with reference ADCs using paired t‐test. Intraclass correlation coefficient (ICC) between the two repetitions, as well as between before and after FM/RG correction were calculated to evaluate ADC repeatability and effects of distortion correction. Six patients were recruited to assess the in‐vivo performance. The optimal distortion correction technique was identified by visual assessment. To quantify distortion reduction, tumor and critical structures were contoured on the turbo spin echo (TSE) image (reference image), the DW‐ssEPI image, and the distortion corrected images independently by two radiation oncologists. Mean distance to agreement (MDA) and DICE coefficient between contours on the reference images and the diffusion images were calculated. Tumor apparent diffusion coefficient (ADC) values from the original DW‐ssEPI images and the distortion corrected images were compared using Bland‐Altman analysis.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Results</h3><p>Sequence optimization played a vital role in improving the spatial integrity, and spatial distortion was proportional to the total readout time. Before the correction, distortion of the optimized protocol (PI and high bandwidth) was 1.50±0.89 mm in a 100 mm radius and 2.21±1.39 mm in a 175 mm radius for the central plane. FM corrections reduced the distortions to 0.42±0.27 mm and 0.67±0.49 mm respectively, and RG reduced distortion to 0.40±0.22 mm and 0.64±0.47 mm respectively. The optimized protocol provided accurate and repeatable ADC quantification on the diffusion phantom. The calculated ADC values were consistent before and after FM/RG correction. For the patient study, the FM correction was unable to reduce chemical shift artifacts whereas the RG method successfully mitigated the chemical shift. MDA reduced from 2.52±1.29 mm to 1.11±0.72 mm after the RG correction. The DICE coefficient increased from 0.80±0.13 to 0.91±0.06. A Bland‐Altman plot showed that there was a good agreement between ADC measurements before and after application of the RG correction.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Conclusion</h3><p>Two distortion correction techniques were evaluated on a commercial low‐field MRgRT system. Overall, the RG correction was able to drastically improve spatial distortion and preserve ADC accuracy.</p></section>

Analysis and measurement of geometrical distortion of computer radiographs

Unified Optical Distortion Correction Method for Imaging Systems Using A Concise Geometrical Transformation Model

Clinical assessment of geometric distortion for a 0.35T MR-guided radiotherapy system

A Robust Evaluation Method for Motion Distortion of TDICCD Image

A modular phantom and software to characterize 3D geometric distortion in MRI

Preliminary Research on Quality Control of PACS Image Display Device

Geometrical rectification for images from a mobile large container inspection system.

Investigation of distortion of panoramic radiographs on mandible

Accuracy of device-specific 2D and 3D image distortion correction algorithms for magnetic resonance imaging of the head provided by a manufacturer

Open-source hardware and software for the measurement, characterization, reporting, and correction of geometric distortion in MRI

The Geometric Pre-Process Research of Digital Image

Automatic Test of Image Conformity for Digital Mammography Based on the Standard of DICOM

A Novel Objective Method for Assessing High-Contrast Spatial Resolution in CT Based on the Rayleigh Criterion.

Imaging Distortion Analysis of Detector Array in Digital Radiography System

Metrology Applications of Quantitative Evaluation Methods in CT Phantom Images

A comprehensive analysis of imaging features and clinical characteristics to differentiate malignant from non-malignant mammographic architectural distortion

Research on Digitized Measurement Technique to Defects in Steel Casting's Radiography Test

Evaluation of the Image in Mammography Application of ALVIM Statistics Phantom Using Computed Radiography(cr)

Comparison and evaluation of distortion correction techniques on an MR‐guided radiotherapy system

Geometrical Calibration Method for X-Ray Intra-Oral Digital Tomosynthesis

Features Extraction of Architectural Distortion in Mammograms