Abstract:The effect of the thermal treatment and composition on microstructure and subsequent mechanical behavior of an Al-2.6 wt.% Li-0.09 wt.% Zr alloy that was solution heat treated (SHT) and artificially aged for a series of aging times and temperatures was studied. The underaged, peakaged, and overaged thermal heat treatments were studied to determine the effect of the microstructure and processing on the mechanical properties. The precipitates in the microstructure, which impede dislocation motion and control the precipitation strengthening response as a function of aging practice, were analyzed as the basis for controlling the strengthening depending on their size distribution, average size, and interparticle spacing. The average particle size, spacing, and size distribution were determined from the microstructure as a function of the thermal processing and composition. For the demonstration alloy, the primary strengthening was a direct consequence of ordered coherent Al3Li (δ′) intermetallic precipitates, which are uniformly distributed throughout the microstructure and restrict the glide motion of dislocations during plastic deformation. The Al3Li average particle size, distribution, spacing, and volume fraction are closely related to the overall mechanical behavior and are a result of the heat treating practice and composition. Consequently, a micromechanical model was developed for predicting the precipitation hardening response in terms of the variation in polycrystalline strength with aging time, aging temperature, and composition. The overall micromechanical model, which was determined from the particle coarsening kinetics, dislocation mechanics, thermodynamics, resolved shear stress, as well as the dislocation particle shearing and bypassing mechanisms, accurately predicted the mechanical strength in the underaged, peak-aged, and overaged tempers of the demonstration alloy.

Research and Development of Al-Zn-Mg-Cu-Li Alloys

The Role of Lithium in the Aging Precipitation Process of Al-Zn-Mg-Cu Alloys and Its Effect on the Properties

Ageing characteristics and microstructure of Al-4Mg-1. 5Cu alloys containing silver and lithium

Effects of Li on microstructure of Al-Zn-Mg-Cu based alloys

Influence of Li on the ageing characteristics and microstructure of Al-Cu-Mg-Ag alloy with low Cu/Mg ratio

Microstructure and Mechanical Properties of Cast Al-Li-Mg Alloy: Role of Cu Addition and Heat Treatment

Ageing Processes of Li-Containing Al-Zn-Mg-Cu Alloys

Microstructural evolution, precipitation behavior and mechanical properties of a novel Al–Zn–Mg–Cu–Li–Sc–Zr alloy

Research and Development of Al-Zn-Mg-Cu Alloys Containing Li

Influence of 1.0 Wt% Li on Precipitates in Al-Zn-Mg-Cu Alloy

Precipitate microstructures, mechanical properties and corrosion resistance of Al-1.0 wt%Cu-2.5 wt%Li alloys with different micro-alloyed elements addition

Structural Insights into T1 Precipitation and Age Hardening by Zn Alloying for T6 Treated Al–Cu–Li Based Alloys with a High Cu/Li Ratio

Microstructure and Mechanical Properties of Mg, Ag and Zn Multi-Microalloyed Al–(3.2–3.8)Cu–(1.0–1.4)Li Alloys

Determining the Effect of Microstructure and Heat Treatment on the Mechanical Strengthening Behavior of an Aluminum Alloy Containing Lithium Precipitation Hardened with the δ′ Al3Li Intermetallic Phase

Microstructure, tensile properties and fracture behaviour of an Al-Cu-Li-Mg-Zr alloy 8090

Influence of Mg content on ageing precipitation behavior of Al-Cu-Li-x alloys

Microstructures and Mechanical Properties of Ultralight Cast Al-3Li-XMg-0.1Zr Alloys

Microstructural Characteristics and Mechanical Properties of Extruded Al-4Cu-1Li-0.4Mg-0.1Zr-xZn Alloy

Effect of Zn/Mg Ratio on Aging Precipitates and Mechanical Property of High Mg Content Al-Mg-Zn Alloys with Sc and Zr Additions

Characterization of Precipitation in Al-Zn-Mg-Cuand Li Containing Al-Zn-Mg-Cu Alloys after Isothermal Aging

Influence of Li addition on mechanical property and aging precipitation behavior of Al-3.5Cu-1.5Mg alloy