Abstract:Non-uniform microchannels are used in the micro space propulsions and micro gas turbine generators. The performances of these applications are determined primarily by the performance of the microchannel used. Based on the micro-fabrication technology, three-dimensional rectangular cross-section straight-convergent-divergent-straight (SCDS) microchannel was fabricated. Its width in the throat cross-section was 16μm, the depth was 20μm and the contraction ratio was 1.625∶1 For different inlet-to-outlet pressure ratios, the volume flow rate characteristics of nitrogen were measured experimentally. The pressure ratios ranged from 1.0 to 4.0, outlet volume flow rate ranged from 0 to 0.12 mL/s and outlet Reynolds number was less than 350 The gas flow characteristics were analyzed by numerical simulation based on finite-volume method. Good agreements between computational results and experimental data were found. The simulation results indicate that two novel behaviors are different from that at conventional scales. One is the first sonic point position, the other is the critical pressure ratio（the critical pressure ratio is defined as the local-to-inlet pressure ratio , here the local pressure corresponding to the pressure at the first sonic point in the internal flow of SCDS microchannel）. These two novel behaviors should be attributed to the surface effects. Due to the larger surface-to-volume ratio (S/V) for microchannels, the factors related to the surface effects have more impact on the microflow. So the relationships between novel behaviors and the value of S/V are discussed further.

GAS FLOW CHARACTERISTICS IN MICRO-NOZZLE

Size Effect on Gas Flow in Micro Nozzles

Analysis of the Flow Characteristics of Diffuser/Nozzle Based on MEMS

FABRICATION AND GAS FLOW CHARACTERISTICS ANALYSIS OF MICRO DIFFUSER/NOZZLES

Sonic point position and critical pressure ratio in micro nozzles

Numerical Simulation and Experiments on Gas Flow in Micro-Nozzle

Characteristics Of Gas Flow Within A Micro Diffuser/Nozzle Pump

An Experiment-Based Comparative Investigation of Correlations for Microtube Gas Flow

Structural Design and Performance of a Jet-Impinging Type Microbubble Generator

3-D Numerical Simulation of Gas Flow in Micronozzles

Leveraging 3D Printing for the Design of High-Performance Venturi Microbubble Generators

Design and Optimization of Three-Dimensional Supersonic Asymmetric Truncated Nozzle

Sonic Point Position and Critical Pressure Ratio in Non-Uniform Microchannels

Effect of Three-Dimensional Surface Topography on Gas Flow in Rough Micronozzles

Experimental Study on Gas-Liquid Flow Characteristics of Submerged Air Jets

Numerical Study of Facility Pressure Effects on Micronozzles for Space Propulsion

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Sub-Choking Phenomenon of Low-Speed Gas Flow in A Long-Constant-Area Microchannel

Flow Characteristics of Mini/micro Sonic Nozzles for Micro-Flow Measurement

Transient behavior of a supersonic three-dimensional micronozzle with an intersecting capillary

Experimental and numerical investigations on flow field characteristics of pintle injector