Abstract:Apart from variable switching frequency, a major issue in direct torque controlled (DTC) induction motor drives is the high torque ripple, which can be minimized by incorporating suitable pulsewidth modulation schemes such as space vector pulsewidth modulation (DTC-SVPWM) and duty ratio control DTC. However, the simplicity and robustness of the DTC scheme are compromised due to the high computational complexity and requirement of a number of motor parameters for the control. In this article, a simple and elegant control algorithm for the realisation of the DTC-SVPWM that is less dependent on motor parameters is proposed. The stator flux-linkage space vector angle needed to generate the reference torque for the DTC operation is computed based on the basic torque equation and the reference stator phase voltage needed for the SVPWM is determined in turn in every sampling period. For the modulation, a carrier-based space vector pulsewidth modulation (CSVPWM) scheme is adopted to get low torque ripple at constant switching frequency. The proposed speed control scheme avoids the use of rotor parameters and rotating reference frame transformations. It requires no sector identification and only one PI controller is needed for the speed control. Though the scheme has comparable torque ripple as that of the conventional DTC-SVPWM scheme, it significantly reduces the computational burden. Hardware results on a three-phase, 2 HP, 415 V induction motor are presented to validate the performance of the proposed control scheme.

SVPWM Method for Performance Improvement of Direct Torque Control

Simulation and experiment on direct torque control based on space vector pulse width modulation of PMSM

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

Direct Torque Control with Zero-Voltage Vector for a Permanent Magnet Synchronous Motor

Research on Sensorless DTC Systems Based on Predictive Control Method

An Improved Directtorque Control Technology Study for Permanent Magnet Synchronous Motor

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

A Novel Torque Ripple Reduction Strategy for Predictive Direct Torque Controlled Pmsg

Direct Torque Control of Induction Motors Based on Fuzzy Space Vector Modulation Technology

Research on Direct Torque Control of Induction Machine Based on Torque Prediction

Direct Torque Control Based on Improved Discrete Space Vector Modulation

A NEW APPROACH TO DIRECT TORQUE CONTROL OF INDUCTION MACHINES

A Simplified DTC-SVPWM Scheme for Induction Motor Drives Using a Single PI Controller

Direct Torque Control of Permanent Magnet Synchronous Motor with SVM

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

Ripple torque lessening in space vector pulse width modulation based direct torque control of permanent magnet synchronous motor drive

SVPWM-based predictive current controller for four-quadrant induction motor drive system

Predictive Direct Torque Control of Induction Motor Fed by Matrix Converter

Direct Torque Control for Induction Motors Based on Minimum Voltage Vector Error

STUDY ON THE PERFORMANCE OF DIFFERENT DIRECT TORQUE CONTROL METHODS FOR PERMANENT MAGNET SYNCHRONOUS MACHINES