Abstract:This paper is aimed at introducing a method of identifying fire flames in vision based on the variation contours.As is known,conventional point smoke and fire detectors are widely used at present fire-fighting practice to detect the presence of certain particles generated by smoke and fire by identifying their ionization and photometry.However,a big weakness of point detectors lies in that in large rooms,it may take a long time for smoke particles to reach a detector and,moreover,it is impossible to operate then in an open space.On the other hand,the vision based fire detection is a good method for large or open spaces and in turn the research in this way has become very active recently.However,the method is still facing great technical challenges since its high false alarming rate.A key problem in this way is not easy to pick up vision features.In addition,the flickering of fire flame is also a common phenomenon in favorite for detecting the fire plume and air flow.Since the contour of fire flame keeps changing with the time,it is necessary to use a CCD camera to gather the video images of fire flame.In doing so,the following methods are supposed to pre-process the image.Firstly,median-filtering system is used to remove the noise of the image.Secondly,pre-mixed background and difference models are used to detect the moving region in the video image.After that,it would be easier to pick up the contour of the image moving region.And,finally,we have brought up forward a flickering model of centroid distance of the contour of fire flame image to define the characteristics of the image,with the distance model of flickering contours between the two successive frames presented in the normalized Fourier descriptors.The results of our experiment show that the algorithm is effective for fire recognition and therefore significant for improving the accuracy of the true fire alarm and reducing the those of the false ones in the meantime time.

Study of fluctuation in fire with photoelectric sensor: Assessment of the procedure

Flammability of Heat Transfer Fluid Aerosols Produced by Electrospray Measured by Laser Diffraction Analysis

Study on statistical invariance of probability processing and fluctuation characteristics of consecutive images of horizontal spray flame under low-pressure

Study On Fire Detection Method Based On Particle Image Analysis

Diagnostic Investigation of Devolatilization, Ignition, and Flame Fluctuation During Laminar Oxy-Coal Combustion

Method of Identifying Fire Flames in Vision Based on the Variation Contours

Flame Detection in Surveillance

Quantitative Assessment of Flame Stability Through Image Processing and Spectral Analysis

Investigation on the test bed of evaluation on stability for flame combustion by joint time frequency analysis

Optimal Parameter Of Flame Detection For Outdoor Fire Under Transverse Airflow And Illumination Environments

Pattern Recognition for Measuring the Flame Stability of Gas-Fired Combustion Based on the Image Processing Technology

Experimental Test and Comparison of Flare Flame Monitoring Technology

FLAME EMISSION CHARACTERISTICS IN A DIRECT INJECTION SPARK IGNITION OPTICAL ENGINE USING IMAGE PROCESSING BASED DIAGNOSTICS

Characterisation of External Acoustic Excitation on Diffusion Flames Using Digital Colour Image Processing

LASER DIAGNOSTICS FOR FLAMES I. THE TEMPERATURE DISTRIBUTION OF A FLAME MEASURED BY LASER INDUCED FLUORESCENCE

Oscillation frequency measurement of gaseous diffusion flames using electrostatic sensing techniques

Flame Boundary Measurement Using an Electrostatic Sensor Array

Analysis of Statistical Fluctuation in Measurements of Low Intensity Pulse Rays

[Passive Remote Measurement of Flame Infrared Image by a FTIR Scanning Imaging System].

Fire Detection Technique Based On Photoacoustic Principle

Laser interferometric detection of heat release rate perturbation field of acoustically perturbed laminar premixed flames