Abstract:Carbon-based composite materials, denoted as C/C composites and possessing high thermal conductivity, were synthesized utilizing a three-dimensional (3D) preform methodology. This involved the orthogonal weaving of mesophase pitch-based fibers in an X (Y) direction derived from low-temperature carbonization, and commercial PAN-based carbon fibers in a Z direction. The 3D preforms were saturated with mesophase pitch in their raw state through a hot-pressing process, which was executed under relatively low pressure at a predetermined temperature. Further densification was achieved by successive stages of mesophase pitch impregnation (MPI), followed by impregnation with coal pitch under high pressure (IPI). The microstructure and thermal conductivity of the C/C composites were systematically examined using a suite of analytical techniques, including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and PLM, amongst others. The findings suggest that the volumetric fraction of fibers and the directional alignment of the mesophase pitch molecules can be enhanced via hot pressing. The high graphitization degree of the mesophase pitch matrix results in an increased microcrystalline size and thus improved thermal conductivity of the C/C composite. Conversely, the orientation of the medium-temperature coal pitch matrix is relatively low, which compensates for the structural inadequacies of the composite material, albeit contributing minimally to the thermal conductivity of the resultant C/C composites. Following several stages of impregnation with mesophase pitch and subsequent impregnation with medium-temperature coal pitch, the 3D C/C composites yielded a density of 1.83 and 2.02 g/cm3. The thermal conductivity in the X (Y) direction was found to be 358 and 400 W/(m·K), respectively.

Effects of preform and pyrolytic carbon structure on thermophysical properties of 2D carbon/carbon composites

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

Effects of Structural Parameters on the Thermal Insulation Properties of Coated Carbon Fiber Fabrics

Densification Behavior and Performances of C/C Composites Derived from Various Carbon Matrix Precursors

Preparation, microstructure and properties of three-dimensional carbon/carbon composites withhigh thermal conductivity

Mechanical and thermal conduction properties of carbon/carbon composites with different carbon matrix microstructures

Analysis of transverse thermal conductivity for mesophase pitch-based carbon fibers and the through-thickness heat conduction of their composites

Effect of Pyrocarbon Content in C/C Preforms on Microstructure and Mechanical Properties of the C/C–SiC Composites

The carbon cloth reinforced 2D-C/C composites with phenolics as matrix precursor

The Microstructure and Thermal Conductive Behavior of Three-Dimensional Carbon/Carbon Composites with Ultrahigh Thermal Conductivity

Effect of Pyrocarbon Content on Thermal and Frictional Properties in C/C Preforms of C/C–SiC Composites

The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C–C composites obtained by CVI

EFFECTS OF FABRIC ARCHITECTURES ON THE THERMAL EXPANSION COEFFICIENT AND THE THERMAL DIFFUSIVITY OF CARBON FIBER REINFORCED SILICON CARBIDE COMPOSITES

Tailoring microstructures of carbon fiber reinforced carbon aerogel-like matrix composites by carbonization to modulate their mechanical properties and thermal conductivities

Effects of Carbon Fiber Architecture on the Microstructure and Mechanical Property of C/C-SiC Composites

The positive role of mesophase-pitch-based carbon fibers in enhancing thermal response behavior in Carbon/Carbon composites

Preparation of C/C Composites by Thermal Gradient Chemical Vapor Infiltration with Vaporized Kerosene As a Precursor

Effect of pyrolysis temperature on properties of ACF/CNT composites

Characterization of Ultralow Thermal Conductivity in Anisotropic Pyrolytic Carbon Coating for Thermal Management Applications

A Numerical Study on the Thermal Conductivity of 3D Woven C/C Composites at High Temperature

Microstructure and Electrical Resistivity of Carbon/carbon Composites Prepared by Thermal Gradient Chemical Vapor Infiltration