Abstract:Efforts have been made to enhance ozone utilization efficiency and reduce energy costs in ozone-aerated wastewater treatment. Microbubbles, characterized by their large interfacial area and efficient gas-liquid mass transfer, are extensively used to boost ozone utilization. However, generating microbubbles demands significant energy, and their actual efficiency requires careful evaluation due to the absence of universal strategies for designing microbubbles with optimal performance. This study established an integrated mathematical model for ozone oxidation in wastewater treatment, based on comprehensive ozone reaction kinetics, microbubble mass transfer control theory, and mass conservation equations for gas-liquid phase components. Simulation results showed a pollutant removal rate with a prediction error of less than 20%, confirming the model's reliability. Further analysis revealed that although the initial mass transfer rate of 0.5 mm bubbles is lower than that of 0.1 mm bubbles, the total mass transfer quantity is reduced by only 8.7%. This suggests that an optimal bubble diameter can balance mass transfer efficiency and energy consumption. Based on this finding, we integrated ozone production and bubble generation energy consumption to develop a regulation mechanism for optimizing bubble diameter, minimizing total energy consumption while meeting target removal rates. Results indicate that the optimal bubble diameter is closely related to water depth: as depth increases, the optimal bubble diameter also increases. At a depth of 2.1 meters, the optimized bubble diameter reduces energy consumption by 33.5% and 16.2% compared to millimeter-sized and 100-micron bubbles, respectively. Sensitivity analysis shows that total energy consumption is more sensitive to changes in specific ozone energy consumption, while variations in bubble generation energy remain relatively stable. These results underscore the feasibility of using the proposed model to guide energy-efficient bubble size selection.

A Closed-Loop Control for the Power Source of the Ozonizer

Design and analysis of an energy recycling electronic load system

Wide-Load Range Multiobjective Efficiency Optimization Produces Closed-Form Control Solutions for Dual Active Bridge Converter

Performance Evaluation of Sinusoidal Power Supplies for Ozone Generation in Water Purification Applications

A Phase-shifting Control IPOS High-voltage Generator with Low Output Voltage Ripple for X-Ray

Water purification system based on self-powered ozone production

Evaluating Effective Volume and Hydrodynamic Behavior in a Full-Scale Ozone Contactor with Computational Fluid Dynamics Simulation

Evaluating hydraulic and disinfection efficiencies of a full-scale ozone contactor using a RANS-based modeling framework

An Energy-Based Analysis of High Voltage Resonant-Based Pulsed Low Power Converter for Water Treatment Application

Inductive Power Transfer Systems for PT-Based Ozone-Driven Circuit With Flexible Capacity Operation and Frequency-Tracking Mechanism

Theoretical Analysis of Ozone Generation by Pulsed Dielectric Barrier Discharge in Oxygen

Challenges and pitfalls in the investigation of the catalytic ozonation mechanism: A critical review

Integrated model of ozone mass transfer and oxidation kinetic: Construction, solving and analysis

Regulation Mechanism of Optimal Bubble Diameter for Ozone Wastewater Treatment

A Voltage-current Close Loop Control Algorithm for Z-Source Inverter

A Novel Model Simulating Reclaimed Water Disinfection by Ozonation

Optimization Of The Electro-Peroxone Process For Micropollutant Abatement Using Chemical Kinetic Approaches

Analysis of Ozonation Effect on Performance and Water Quality in Closed-System Cooling Tower

Residence time and the concentration of microorganism in the ozone contactor: a CFD simulation on chamber deflectors

Experimental Study on the Generation of Ozone Using High Frequency Dielectric Barrier Discharge

Optimization of Ozone Dosage in an Ozone Contact Tank Using a Numerical Model