Abstract:The inherent nonlinearity of the pendulum motion becomes increasingly pronounced as excitation amplitudes rise, leading to the uncertainty of vibration and the loss of predictive accuracy owing to the linear assumption. To address this concern, this study introduces the pendulum tuned mass damper (PTMD) with hysteretic damping (HD) to realize the nonlinear performance oriented optimal seismic design. The primary contribution of this study is introducing the nonlinear performance of the PTMD with HD, thereby proposing amplitude robustness optimization based on nonlinear dynamic performance. Theoretical configurations of PTMD that facilitate different types of damping, including viscous damping (VD), constant damping, and hysteretic damping (HD), are compared. The Krylov-Bogoliubov (K-B) method is originally adopted to analyze the nonlinear effect of the PTMDs in the case of forced oscillation and free vibration. The nonlinear frequency response functions (FRFs) of the structure-PTMD system are derived, and the coupled systems are evaluated. The presence of stiffness softening, the persistence of stable solutions, and the occurrence of unstable frequency response loops demonstrate the inherent nonlinearity and sensitivity of control effectiveness. Attenuation characteristics of the PTMDs are obtained to determine the damping dissipation properties with accuracy compared with the dynamic solutions. Prue HD shows a similar dynamic interaction with an exponential decay in damping dissipation as the VD, which exhibits the linear damping performance for the coupled control system. A nonlinear performance oriented optimal seismic design based on the amplitude robustness index is proposed to consider the amplitude uncertainty impact on the structure-PTMD system. A case study is assessed based on the 20-story benchmark structure to investigate the functionality of the proposed optimization for the PTMD with HD. The results confirm the effectiveness of optimization from the perspective of FRFs, where the optimal PTMD with HD exhibited an FRF with a lower peak in structural amplitude compared to the optimal PTMD with VD. Seismic validations of the spectral analysis and specific earthquake evaluations verify the applicability of the proposed optimization for PTMD with HD, enabling an enlarged damping dissipation capacity as earthquake excitation increases to provide better structural protection.

Comparative Study on Performance of Displacement Response Control Based MTMD for Structures under Various Excitations

Research on the Optimum MTMD Based on Parameter Combinations and Acceleration Transfer Function

CHARACTERISTIC ANALYSIS OF MTMD FOR SEISMICALLY EXCITED STRUCTURES

Comparative Studies on Structures with a Tuned Mass Damper and a Particle Damper

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Assessment of Influence of Earthquake Dominant Frequency on Active Tuned Mass Damper Resistant Control Design

Optimum tuning of Tuned Mass Dampers for frame structures under earthquake excitation

Experimental Study of the Semi-Active Mass Damper under Impulse Excitation

Optimal control for vibration peak reduction via minimizing large responses

Seismic Optimization for Hysteretic Damping-Tuned Mass Damper (HD-TMD) Subjected to White-Noise Excitation

Optimal parameters of MTMD in wind vibration control

Study on control of wind induced vibration of Changzhou E120 Theme Park Landscape Tower with MTMD

Analytical design of non-grounded tuned mass-damper-inerter for base-excited structures

Seismic Performances of a Structure Equipped with a Large Mass Ratio Multiple Tuned Mass Damper

Evaluation of Multiple Active Lever-Type Tuned Mass Dampers for Structures under Ground Acceleration

Seismic response control of tall building using semi-active tuned mass damper considering soil-structure interaction

Inerter-based tuned mass dampers for response control of multi-degree-of-freedom structures subjected to wind and earthquake excitations

Mechanics performance test of MR damper and its application in structural seismic response control

Multi-objective optimization and seismic performance verification of multiple tuned impact dampers for nonlinear benchmark building

Comparative Studies of Semiactive Control Strategies for MR Dampers: Pure Simulation and Real-Time Hybrid Tests

Seismic optimization of pendulum tuned mass damper with hysteretic damping