Abstract:High-rise buildings located in strong wind and earthquake-prone regions are exposed to multiple hazards that must be properly considered to prevent considerable socio-economic losses. In the present study, the Tuned Mass Damper-Inerter (TMDI) is adopted for the structural control of high-rise buildings under wind and earthquake excitations by exploiting its inherent multiple-mode control effects. A generalized multi-degree-of-freedom (MDOF) model of TMDI-controlled structure is established first and compared with the commonly-adopted generalized single-degree-of-freedom (SDOF) model. Analytical investigation on the multiple-mode control effects of TMDI demonstrates that the damping effects weighted by mode coordinate differences at two terminals of TMDI are mainly responsible for its multiple-mode control effects. Based on a real high-rise building project, analysis errors induced by the generalized SDOF model against the more accurate generalized MDOF model are quantified by a comprehensive Monte Carlo simulation, which suggests the necessity of adopting numerical search for parametric design of TMDI under most circumstances. Therefore, the parameters of TMDI and its two competitors, i.e., Multi-Tuned Mass Damper (MTMD) and Multi-Tuned Mass Damper-Inerter (MTMDI), are optimized using a genetic algorithm, assuming both wind- and earthquake-induced responses as performance objectives. Time and frequency domain analyses demonstrate the efficiency of utilizing the multiple-mode control effects of a single TMDI for multi-hazard design. The trend of the equivalent damping ratio of TMDI-controlled structure on an arbitrary mode is analyzed to identify the design parameters affecting most the TMDI multiple-mode control effect at last.

Optimal parameters of MTMD in wind vibration control

TMD Control Analysis of Reticulated Shells for Wind Vibration

Exact Solutions for a Novel H<sub>2</sub> Optimal Design of Electromagnetic Tuned Mass Damper

Study on control of wind induced vibration of Changzhou E120 Theme Park Landscape Tower with MTMD

Parameter Optimization Of Multi-Tmds For Wind-Excited Vibration Suppression Of Tall Buildings

Optimal Design of Multiple Tuned Mass Dampers for Vibration Control of a Cable-Supported Roof

Wind-induced vibration absorption using inerter-based double tuned mass dampers on slender structures

Optimized Design of a Tuned Mass Damper Inerter (TMDI) Applied to Circular Section Members of Transmission Towers

Multiple Tuned Mass Dampers for Wind Induced Vibration Control of a Cable-Supported Roof

Mitigation of In-Plane Vibrations in Large-Scale Wind Turbine Blades with a Track Tuned Mass Damper

OPTIMUM DESIGN OF TUNED MASS DAMPER FOR FOOTBRIDGE

Study on optimization algorithm of tuned mass damper parameters to reduce vehicle-bridge coupled vibration

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Vibration control of a pentapod offshore wind turbine under combined seismic wind and wave loads using multiple tuned mass damper

Analysis on control of wind induced vibration of one symbol tower with MR-TMD

Optimization Study of a Tuned Mass Damper for a Large Monopile Wind Turbine

Vibration Control of Steel Wind Turbine Tower Using a Novel Tuned Mass Damper Refitted via Inner Platform

Optimum design of linear multiple tuned mass dampers subjected to white-noise base acceleration considering practical configurations

H2 norm based parameter optimization of multiple tuned mass dampers for resonance suppression

Tuned mass-damper-inerter control of wind-induced vibration of flexible structures based on inerter location

Structural Vibration Suppression of Wind Turbine Based on Dynamic Vibration Absorption