Abstract:The most important characteristic of semi-solid processing is that the solidification microstructure changes markedly from dendritic growth under traditional conditions to non-dendritic or globular growth, which results in apparent viscosity greatly reduction. In another hand, semi-solid slurry shows admirable fluidity compared with traditional processing slurry. With the intensive development of semi-solid metal processing technology, the interaction between melt flow and solidification microstructure becomes gradually one of the important fundamental research fields in materials science. In the previous work, it is very difficult to measure apparent viscosity and observe microstructure of semi-solid simultaneity using opaque metal materials. Conclusions of rheological behavior and microstructure evolution in semi-solid processing can be drawn qualitatively. Because of the metal materials not transparency and the researches on microstructure only after quenching, it is difficult to measure rheological behavior and observe dynamic microstructure evolution simultaneously. Therefore, it is also hard to grasp the coupling effect on rheology and microstructure of semi-solid alloy, which has affected the understanding and controlling accurately on solid forming process. In present paper, the coupling effect of shear rate and the processing (continuous cooling and remelted) processes on the rheology and microstructure of semi-solid SCN-5H(2)O (molar fraction, %) transparent model alloys were investigated using rotating viscometer. It is found that the increase of shear rate will lead the apparent viscosity of the semi-solid alloy to present a transient shear-thickening and steady shear-thinning behavior, correspondingly, the size of non-dendritic microstructure decreases and the distribution of aggregate becomes more disperse with increasing the shear rate, while, the shape factor of the non-dendritic microstructure changes little; a larger particle size and slightly lower shape factor for non-dendritic microstructure were obtained in the semi-solid alloy slurry made by re-melted process on comparison with that by continuous cooling process, meanwhile, the aggregation of the aggregates becomes stronger, which also results in that the apparent viscosity of the semi-solid alloy slurry made by re melted process is larger than that by continuous cooling process.

In-situ microstructure observation and rheological measurement of SCN-5at.%WATER alloy in the semi-solid state

COUPLING EFFECT ON RHEOLOGY AND MICROSTRUCTURE OF SEMI-SOLID SCN-5H2O MODEL ALLOY

Steady State Rheological Behavior of Semisolid SCN-5at.%Wat. Alloy

Microstructure Evolution During Semi-Solid Processing of SCN-Water and Sn-Pb Alloys

Morphological determination of forced shear flow rate during directional solidification of succinonitrile-1%salol alloy

Influence of Rapid Shear-Rate Changes on Microstructure Formation During Semi-Solid Processing

Formation of semisolid globular structures under shearing

Ultrasonic Cavitation and Acoustic Streaming Effects During Liquid Phase Separation and Dynamic Solidification of Ternary Al–Sn–Si Immiscible Alloy

The Effect of the Shear Flow on Directional Solidification of Scn-3wt% Salol Alloy

Microstructure Control and Micromechanical Property Enhancement of CoCrFeNiZr 0.5 Alloy under Melt Quenching and Electrostatic Levitation Conditions

Microstructure characteristics and strengthening mechanism of semisolid CuSn10P1 alloys

Rapid Solidification of Non-Stoichiometric Intermetallic Compounds: Modeling and Experimental Verification

Development of Rheometer for Semi-Solid High-Melting Point Alloys

Microstructural Evolution Mechanism of Semi-Solid Slurry: a Study Using Phase-Field-Lattice-Boltzmann Scheme

Morphological Evolution of Non-Dendritic Microstructure During Solidification under Stirring

Dynamic evolution of microstructure morphology in thin-sample solidification: Deep learning assisted synchrotron X-ray radiography

Microstructure-dependent Mechanical Properties of Semi-Solid Copper Alloys

A hybrid molecular dynamics study on the non-Newtonian rheological behaviors of shear thickening fluid

Experimental study on the special shear thinning process of a kind of non-Newtonian fluid

Apparent Viscosity and Rheological Behavior of Aluminum-Alloy Slurry Containing Nano-Sized SiC Particles

Computer simulation of the microstructure and rheology of semi-solid alloys under shear