Abstract:Ag-based catalysts supported on various metal oxides, Al2O3, TiO2, and TiO2–Al2O3, were prepared by the sol–gel method. The effect of SO2 on catalytic activity was investigated for NO reduction with propene under lean burn condition. The results showed the catalytic activities were greatly enhanced on Ag/TiO2–Al2O3 in comparison to Ag/Al2O3 and Ag/TiO2, especially in the low temperature region. Application of different characterization techniques revealed that the activity enhancement was correlated with the properties of the support material. Silver was highly dispersed over the amorphous system of TiO2–Al2O3. NO3− rather than NO2− or NOx reacted with the carboxylate species to form CN or NCO. NO2 was the predominant desorption species in the temperature programmed desorption (TPD) of NO on Ag/TiO2–Al2O3. More amount of formate (HCOO−) and CN were generated on the Ag/TiO2–Al2O3 catalyst than the Ag/Al2O3 catalyst, due to an increased number of Lewis acid sites. Sulfate species, resulted from SO2 oxidation, played dual roles on catalytic activity. On aged samples, the slow decomposition of accumulated sulfate species on catalyst surface led to poor NO conversion due to the blockage of these species on active sites. On the other hand, catalytic activity was greatly enhanced in the low temperature region because of the enhanced intensity of Lewis acid site caused by the adsorbed sulfate species. The rate of sulfate accumulation on the Ag/TiO2–Al2O3 system was relatively slow. As a consequence, the system showed superior capability for selective adsorption of NO and SO2 toleration to the Ag/Al2O3 catalyst.

Catalytic removal of nitrogen oxides for the lean-burn automobile exhaust

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

[Alumina-Supported Catalysts for the Catalytic Purification of Lean-Burn Automobile Exhaust].

Selective Catalytic Reduction of NO X from Exhaust of Lean-Burn Engine over Ag-Al 2 O 3 /cordierite Catalyst

The Activity and Characterization of Sol-Gel Sn/Al2o3 Catalyst for Selective Catalytic Reduction of Nox in the Presence of Oxygen

Application of the Ag/Al2O3 catalyst in the selectively catalytic reduction of NO by hydrocarbons

Preparation of Ag/ Al2O3 Selective Catalytic Reduction Monolithic Catalyst

Catalytic performance of Ag/Al2O3-C2H5OH-Cu/Al2O3 system for the removal of NOx from diesel engine exhaust.

High Activity Sno2/Al2o3 Catalyst For No Reduction In The Presence Of Oxygen

Cooperation of Pt/Al2O3 and In/Al2O3 Catalysts for NO Reduction by Propene in Lean Burn Condition

Improvement of Catalytic Activity and Sulfur-Resistance of Ag/TiO2–Al2O3 for NO Reduction with Propene under Lean Burn Conditions

Effects of SO2 on NO reduction with methanol over Ag/Al2O3 catalyst]

Application of Pt-Al2O3 catalyst in selective catalytic reduction of nitrogen oxide by propene

Selective Catalytic Reduction of NO_x on Ag/Al_2O_3 Catalyst in Lean-Burn Gasoline Engines

Selective reduction of NOx with propene over SnO2/Al2O3 catalyst]

Influence of preparation methods on selective catalytic reduction of nitric oxides by propene over silver–alumina catalyst

Selective Catalytic Reduction of NOx with Propene over SnO2/Al2O3 Catalyst

Two-stage catalytic system of Sn/Al2O3 and Pt/Al2O3for NO reduction by propene in lean conditions

Selective Catalytic Reduction of No in the Presence of Excess Oxygen I Center Dot Scr of No with C3h6 over Ag/Al2o3

Two-stage Catalytic System of Sn/Al2O3and Pt/Al2O3for NO Reduction by Propene in Lean Conditions

Selective Catalytic Reduction of NO with C3H6 over SnO2-Al2O3 Binary Metal Oxide Catalysts