Abstract:The traditional direct torque control (DTC) strategy utilizes the largest 14 voltage vectors for a seven-phase induction machine (7PIM), which is directly extended from the three-phase counterparts. This method suffers from the issues of severe harmonic currents and torque ripple for multiphase ones. This article first puts forward the concept of virtual vectors for a 7PIM. This can efficiently eliminate the third- and fifth-order harmonic currents. However, the DTC strategy based on the virtual voltage vector has insignificant effect on reducing the torque ripple. Then, the torque ripple caused by these virtual vectors in different torque and speed conditions is investigated. Analysis shows that there are some additional degrees of freedom while choosing the applied voltage vector. A novel sequential strategy integrated with duty ratio optimization algorithm is proposed to select the optimal voltage vector that can significantly alleviate the torque ripple. Experimental results verified that the proposed method can effectively reduce the dynamic and steady-state torque ripple as well as the harmonic current.This article utilizes a 7PIM for an illustration, but it should be mentioned here that the proposed strategy is applicable for multiphase machines with any number of phases.

Predictive Direct Torque Control Strategies of Induction Motor Based on Area Voltage Vectors Table

Predictive control of torque and flux of induction motor drives

Predictive Direct Torque Control of PM Synchronous Motors Based on an Area Voltage Vector Table

Research on Direct Torque Control of Induction Machine Based on Torque Prediction

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

A Novel Sequential Direct Torque Control Scheme for Seven-phase Induction Motors

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

Direct Torque Control of the Induction Motor Fed with a Three-Level Inverter

Speed-sensorless Direct Torque Control System of Induction Motor

A Direct Torque Control Strategy of Five-Phase Induction Motor with Duty Cycle Optimization

Direct Torque Control with Zero-Voltage Vector for a Permanent Magnet Synchronous Motor

Predictive Current Control for Seven-Phase Induction Motor Based on the Optimal Operating Time of Four-Dimensional Vector

A new full-speed range direct torque control strategy for induction machine

A Novel Torque Ripple Reduction Strategy for Predictive Direct Torque Controlled Pmsg

Virtual vectors based predictive control of torque and flux of induction motor and speed sensorless drives

Sensorless Predictive Torque Control Strategy of Induction Motor Based on Stratified Optimization Method

Predictive Direct Torque Control of Induction Motor Fed by Matrix Converter

Direct Torque Control for Induction Motors Based on Minimum Voltage Vector Error

A New Intelligent Control Strategy of Combined Vector Control and Direct Torque Control for Dynamic Performance Improvement of Induction Motor Drive

Research on Fuzzy Direct Torque Controlling System of Induction Machine with Fuzzy Speed Regulator

Predictive Control Of Torque And Flux Of Induction Motor With An Improved Stator Flux Estimator