Abstract:To improve the interruption capability and reduce the semiconductor cost of the hybrid DC circuit breaker,we proposed a new hybrid DC circuit breaker topology with bidirectional interruption based on forced zero crossing series-connected thyristors technique.By analyzing the breaking principle,we derived the parameters of voltage balancing circuit for the series-connected thyristors and diodes valves during the reverse recovery stage.Then,taking a 10 kV prototype for example,we carried out the devices selection and parameters design of the main and transfer branch.At last,a 10 kV DC breaker principle prototype and its test circuit were set up.The study results show that,in normal operation,the mechanical switch and small amount of series-connected full-controlled devices in main branch handle the low conduction loss.In case of interruption,the fault current is commutated to thyristors valve,and the current of thyristors valve is forced to zero by injecting current inversely for turning offthyristors.At last the inductive energy is dissipated by the energy absorbing branch.The principal prototype breaks the short current of 8.8 kA peak value under 10 kV voltage where the interruption time is less than 3 ms.The voltage rating and fault current withstanding capability of the breaker can be easily improved by adjusting the series-connected number and type of the semiconductor devices in the transfer branch.The diode valves can suppress the over-voltage of thyristor devices during reverse recovery under the high current interruption transient condition to decrease the risk of damage for thyristors.There is no need to adjust triggering time and match parameters for thyristors in series during the commutation and interruption stage of the hybrid breakers.In conclusion,the proposed hybrid DC breaker has the short-circuit fault fast cleating capability,so it is more suitable for the practical project of the future flexible high-voltage DC grid.

The Application of Thyristor in High Power Converter and DC Breaker

Design and Implementation of a High-Power DC/DC Converter for HVDC Interconnections with Wide DC Voltage Range and Fault-Blocking Capability

Thyristor Based Hybrid Arc-less High Voltage Direct Current Circuit Breaker

Novel Hybrid DC Circuit Breaker Based on Series Connection of Thyristors and IGBT Half-Bridge Submodules

A Scheme for Current-limiting Hybrid DC Circuit Breaker

Study on voltage type high power thyristor full bridge inverter

A Series-parallel Connected Four-transformer LLC Converter Based on Series-connected IGBTs for Medium-voltage High-power Applications

A New Thyristor-Based DC Circuit Breaker Using Diode Clamping Switching

Diode Clamping Based Current-transferring High Voltage DC Breaker

Topology of Current-Limiting and Energy-Transferring DC Circuit Breaker for DC Distribution Networks

Research and Development of 500kv Hybrid HVDC Circuit Breaker with Current Commutation Drive Circuit

Hybrid HVDC Circuit Breaker Based on Series-connected Thyristors with Forced Zero Crossing Technique

Development of a Thyristor-Assisted Hybrid DC Circuit Breaker for Reduced Cost and Size

A 320kV hybrid HVDC circuit breaker based on thyristors forced current zero technique

A Novel Converter-Breaker Integrated Voltage Source Converter Based on High-Surge IGCT and Fault Self-Clearing Strategy for DC Grid

The Emitter Turn-Off Thyristor-Based Dc Circuit Breaker

A novel current-limiting hybrid DC breaker based on thyristors

High-Performance and Economical Forced Resonant DC Circuit Breaker: Topology, Design, and Development

Researches on 10 kV DC Hybrid Circuit Breaker Based on IGCT Series

Study of Energy Flow Mechanisms in High Power Device Converters

A Multi-pulse Thyristor Rectifier with High Power Factor